diff --git a/platformio.ini b/platformio.ini
index 2abb03b..4ba39df 100644
--- a/platformio.ini
+++ b/platformio.ini
@@ -10,10 +10,12 @@
 
 [env:nodemcuv2]
 platform = espressif8266
+framework = esp8266-rtos-sdk
 board = nodemcuv2
-framework = arduino
+lib_deps =
+  FastLED
 
 [env:esp32thing]
-platform = espressif32
+platform = espressif32_stage
+framework = espidf
 board = esp32thing
-framework = arduino
diff --git a/src/config.h b/src/config.h
new file mode 100644
index 0000000..5b69e26
--- /dev/null
+++ b/src/config.h
@@ -0,0 +1,7 @@
+#ifndef _CONFIG_H
+#define _CONFIG_H
+
+#define WIFI_SSID "ssid"
+#define WIFI_PASSWORD "password"
+
+#endif /* _CONFIG_H */
diff --git a/src/main.cpp b/src/main.cpp
deleted file mode 100644
index 304d6fa..0000000
--- a/src/main.cpp
+++ /dev/null
@@ -1,32 +0,0 @@
-/**
- * Blink
- *
- * Turns on an LED on for one second,
- * then off for one second, repeatedly.
- */
-#include "Arduino.h"
-
-#ifndef LED_BUILTIN
-#define LED_BUILTIN 13
-#endif
-
-void setup()
-{
-  // initialize LED digital pin as an output.
-  pinMode(LED_BUILTIN, OUTPUT);
-}
-
-void loop()
-{
-  // turn the LED on (HIGH is the voltage level)
-  digitalWrite(LED_BUILTIN, HIGH);
-
-  // wait for a second
-  delay(1000);
-
-  // turn the LED off by making the voltage LOW
-  digitalWrite(LED_BUILTIN, LOW);
-
-   // wait for a second
-  delay(1000);
-}
diff --git a/src/main_esp32.cpp b/src/main_esp32.cpp
new file mode 100644
index 0000000..d655aa9
--- /dev/null
+++ b/src/main_esp32.cpp
@@ -0,0 +1,34 @@
+/* Hello World Example
+
+   This example code is in the Public Domain (or CC0 licensed, at your option.)
+
+   Unless required by applicable law or agreed to in writing, this
+   software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
+   CONDITIONS OF ANY KIND, either express or implied.
+*/
+
+#ifdef ESP32
+#include <stdio.h>
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include "esp_system.h"
+#include "nvs_flash.h"
+
+void hello_task(void *pvParameter)
+{
+    printf("Hello world!\n");
+    for (int i = 10; i >= 0; i--) {
+        printf("Restarting in %d seconds...\n", i);
+        vTaskDelay(1000 / portTICK_RATE_MS);
+    }
+    printf("Restarting now.\n");
+    fflush(stdout);
+    esp_restart();
+}
+
+extern "C" void app_main()
+{
+    nvs_flash_init();
+    xTaskCreate(&hello_task, "hello_task", 2048, NULL, 5, NULL);
+}
+#endif
diff --git a/src/main_esp8266.cpp b/src/main_esp8266.cpp
new file mode 100644
index 0000000..a6095ac
--- /dev/null
+++ b/src/main_esp8266.cpp
@@ -0,0 +1,85 @@
+#ifdef ESP8266
+#include "esp_common.h"
+
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+
+#include <FastLED.h>
+
+static constexpr uint8_t LED_PIN = D2;
+static constexpr uint8_t PIR_PIN = D1;
+uint16_t brightness = 96;
+uint16_t speed = 20;
+#define LED_TYPE	WS2812
+#define COLOR_ORDER	GRB
+
+static constexpr uint8_t NUM_LEDS = 50;
+
+CRGB leds[NUM_LEDS];
+
+uint8_t noise[NUM_LEDS];
+
+CRGBPalette16 currentPalette( PartyColors_p );
+
+/******************************************************************************
+ * FunctionName : user_rf_cal_sector_set
+ * Description  : SDK just reversed 4 sectors, used for rf init data and paramters.
+ *                We add this function to force users to set rf cal sector, since
+ *                we don't know which sector is free in user's application.
+ *                sector map for last several sectors : ABCCC
+ *                A : rf cal
+ *                B : rf init data
+ *                C : sdk parameters
+ * Parameters   : none
+ * Returns      : rf cal sector
+*******************************************************************************/
+extern "C" uint32 user_rf_cal_sector_set(void)
+{
+    flash_size_map size_map = system_get_flash_size_map();
+    uint32 rf_cal_sec = 0;
+
+    switch (size_map) {
+        case FLASH_SIZE_4M_MAP_256_256:
+            rf_cal_sec = 128 - 5;
+            break;
+
+        case FLASH_SIZE_8M_MAP_512_512:
+            rf_cal_sec = 256 - 5;
+            break;
+
+        case FLASH_SIZE_16M_MAP_512_512:
+        case FLASH_SIZE_16M_MAP_1024_1024:
+            rf_cal_sec = 512 - 5;
+            break;
+
+        case FLASH_SIZE_32M_MAP_512_512:
+        case FLASH_SIZE_32M_MAP_1024_1024:
+            rf_cal_sec = 1024 - 5;
+            break;
+        case FLASH_SIZE_64M_MAP_1024_1024:
+            rf_cal_sec = 2048 - 5;
+            break;
+        case FLASH_SIZE_128M_MAP_1024_1024:
+            rf_cal_sec = 4096 - 5;
+            break;
+        default:
+            rf_cal_sec = 0;
+            break;
+    }
+
+    return rf_cal_sec;
+}
+
+extern "C" void ICACHE_FLASH_ATTR user_init()
+{
+  os_printf("SDK version:%s\n", system_get_sdk_version());
+
+  LEDS.addLeds<LED_TYPE,LED_PIN,COLOR_ORDER>(leds,NUM_LEDS);
+  LEDS.setBrightness(brightness);
+
+  loop();
+}
+
+void loop() {
+}
+#endif
diff --git a/src/sdkconfig.h b/src/sdkconfig.h
new file mode 100644
index 0000000..64ef778
--- /dev/null
+++ b/src/sdkconfig.h
@@ -0,0 +1,125 @@
+/*
+ *
+ * Automatically generated file; DO NOT EDIT.
+ * Espressif IoT Development Framework Configuration
+ *
+ */
+#define CONFIG_GATTC_ENABLE 1
+#define CONFIG_ESP32_PHY_MAX_TX_POWER 20
+#define CONFIG_PHY_ENABLED 1
+#define CONFIG_TRACEMEM_RESERVE_DRAM 0x0
+#define CONFIG_FREERTOS_MAX_TASK_NAME_LEN 16
+#define CONFIG_BLE_SMP_ENABLE 1
+#define CONFIG_IPC_TASK_STACK_SIZE 1024
+#define CONFIG_ESPTOOLPY_FLASHFREQ "40m"
+#define CONFIG_NEWLIB_STDOUT_ADDCR 1
+#define CONFIG_TASK_WDT_CHECK_IDLE_TASK 1
+#define CONFIG_ESPTOOLPY_FLASHSIZE "2MB"
+#define CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER 1
+#define CONFIG_ETHERNET 1
+#define CONFIG_INT_WDT 1
+#define CONFIG_ESPTOOLPY_FLASHFREQ_40M 1
+#define CONFIG_LOG_BOOTLOADER_LEVEL_INFO 1
+#define CONFIG_ESPTOOLPY_FLASHSIZE_2MB 1
+#define CONFIG_AWS_IOT_MQTT_PORT 8883
+#define CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS 1
+#define CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM 10
+#define CONFIG_LOG_DEFAULT_LEVEL_INFO 1
+#define CONFIG_BT_RESERVE_DRAM 0x10000
+#define CONFIG_ESP32_PANIC_PRINT_REBOOT 1
+#define CONFIG_CONSOLE_UART_BAUDRATE 115200
+#define CONFIG_LWIP_MAX_SOCKETS 10
+#define CONFIG_EMAC_TASK_PRIORITY 20
+#define CONFIG_TIMER_TASK_STACK_DEPTH 2048
+#define CONFIG_FATFS_CODEPAGE 1
+#define CONFIG_ESP32_DEFAULT_CPU_FREQ_160 1
+#define CONFIG_ULP_COPROC_RESERVE_MEM 0
+#define CONFIG_ESPTOOLPY_BAUD 115200
+#define CONFIG_INT_WDT_CHECK_CPU1 1
+#define CONFIG_FLASHMODE_DIO 1
+#define CONFIG_ESPTOOLPY_AFTER_RESET 1
+#define CONFIG_TOOLPREFIX "xtensa-esp32-elf-"
+#define CONFIG_FREERTOS_IDLE_TASK_STACKSIZE 1024
+#define CONFIG_ESP32_WIFI_AMPDU_ENABLED 1
+#define CONFIG_CONSOLE_UART_NUM 0
+#define CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC 1
+#define CONFIG_ESPTOOLPY_BAUD_115200B 1
+#define CONFIG_LWIP_THREAD_LOCAL_STORAGE_INDEX 0
+#define CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS 1
+#define CONFIG_CONSOLE_UART_DEFAULT 1
+#define CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN 16384
+#define CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS 4
+#define CONFIG_ESPTOOLPY_FLASHSIZE_DETECT 1
+#define CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE 1
+#define CONFIG_BTDM_CONTROLLER_RUN_CPU 0
+#define CONFIG_TCPIP_TASK_STACK_SIZE 2560
+#define CONFIG_TASK_WDT 1
+#define CONFIG_MAIN_TASK_STACK_SIZE 4096
+#define CONFIG_TASK_WDT_TIMEOUT_S 5
+#define CONFIG_INT_WDT_TIMEOUT_MS 300
+#define CONFIG_ESPTOOLPY_FLASHMODE "dio"
+#define CONFIG_BTC_TASK_STACK_SIZE 3072
+#define CONFIG_BLUEDROID_ENABLED 1
+#define CONFIG_ESPTOOLPY_BEFORE "default_reset"
+#define CONFIG_LOG_DEFAULT_LEVEL 3
+#define CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION 1
+#define CONFIG_TIMER_QUEUE_LENGTH 10
+#define CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM 32
+#define CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER 20
+#define CONFIG_ESP32_RTC_CLK_CAL_CYCLES 1024
+#define CONFIG_ESP32_WIFI_NVS_ENABLED 1
+#define CONFIG_AWS_IOT_SDK 1
+#define CONFIG_DMA_RX_BUF_NUM 10
+#define CONFIG_TCP_SYNMAXRTX 6
+#define CONFIG_PYTHON "python"
+#define CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1 1
+#define CONFIG_ESPTOOLPY_COMPRESSED 1
+#define CONFIG_PARTITION_TABLE_FILENAME "partitions_singleapp.csv"
+#define CONFIG_LWIP_DHCP_MAX_NTP_SERVERS 1
+#define CONFIG_PARTITION_TABLE_SINGLE_APP 1
+#define CONFIG_WIFI_ENABLED 1
+#define CONFIG_LWIP_DHCP_DOES_ARP_CHECK 1
+#define CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE 4096
+#define CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY 2000
+#define CONFIG_ESP32_APPTRACE_DEST_NONE 1
+#define CONFIG_PARTITION_TABLE_CUSTOM_APP_BIN_OFFSET 0x10000
+#define CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM 32
+#define CONFIG_FATFS_CODEPAGE_ASCII 1
+#define CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1 1
+#define CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ 160
+#define CONFIG_FREERTOS_HZ 100
+#define CONFIG_LOG_COLORS 1
+#define CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE 1
+#define CONFIG_FREERTOS_ASSERT_FAIL_ABORT 1
+#define CONFIG_ESP32_XTAL_FREQ 0
+#define CONFIG_MONITOR_BAUD_115200B 1
+#define CONFIG_LOG_BOOTLOADER_LEVEL 3
+#define CONFIG_SMP_ENABLE 1
+#define CONFIG_ESPTOOLPY_BEFORE_RESET 1
+#define CONFIG_ESPTOOLPY_BAUD_OTHER_VAL 115200
+#define CONFIG_ESP32_XTAL_FREQ_AUTO 1
+#define CONFIG_TCP_MAXRTX 12
+#define CONFIG_ESPTOOLPY_AFTER "hard_reset"
+#define CONFIG_DMA_TX_BUF_NUM 10
+#define CONFIG_ESP32_DEBUG_OCDAWARE 1
+#define CONFIG_TIMER_TASK_PRIORITY 1
+#define CONFIG_BT_ENABLED 1
+#define CONFIG_MONITOR_BAUD 115200
+#define CONFIG_FREERTOS_CORETIMER_0 1
+#define CONFIG_PARTITION_TABLE_CUSTOM_FILENAME "partitions.csv"
+#define CONFIG_MBEDTLS_HAVE_TIME 1
+#define CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY 1
+#define CONFIG_GATTS_ENABLE 1
+#define CONFIG_FREERTOS_ISR_STACKSIZE 1536
+#define CONFIG_OPENSSL_ASSERT_DO_NOTHING 1
+#define CONFIG_AWS_IOT_MQTT_HOST ""
+#define CONFIG_SYSTEM_EVENT_QUEUE_SIZE 32
+#define CONFIG_BT_ACL_CONNECTIONS 4
+#define CONFIG_FATFS_MAX_LFN 255
+#define CONFIG_ESP32_WIFI_TX_BUFFER_TYPE 1
+#define CONFIG_APP_OFFSET 0x10000
+#define CONFIG_MEMMAP_SMP 1
+#define CONFIG_SPI_FLASH_ROM_DRIVER_PATCH 1
+#define CONFIG_MONITOR_BAUD_OTHER_VAL 115200
+#define CONFIG_ESPTOOLPY_PORT "/dev/ttyUSB0"
+#define CONFIG_OPTIMIZATION_LEVEL_RELEASE 1