fix CI output directory

example code
switch to arduino framework
6 changed files with 32 additions and 251 deletions
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@ -9,4 +9,4 @@ build:
 # to flash: esptool.py --before default_reset --after hard_reset --chip esp32 --port "/dev/ttyUSB0" --baud 115200 write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x1000 "/home/user/.platformio/packages/framework-arduinoespressif32/tools/sdk/bin/bootloader.bin" 0x8000 ".pioenvs/esp32thing/partitions.bin" 0xe000 "/home/user/.platformio/packages/framework-arduinoespressif32/tools/partitions/boot_app0.bin" 0x10000 .pioenvs/esp32thing/firmware.bin
  artifacts:
    paths:
-      - ".pioenvs/esp32thing/*.bin"
+      - ".pioenvs/nodemcuv2/*.bin"
--- a/platformio.ini
+++ b/platformio.ini
@ -10,12 +10,7 @@

 [env:nodemcuv2]
 platform = espressif8266
-framework = esp8266-rtos-sdk
+framework = arduino
 board = nodemcuv2
 lib_deps =
  FastLED
-
-[env:esp32thing]
-platform = espressif32_stage
-framework = espidf
-board = esp32thing
--- a/src/main.ino
+++ b/src/main.ino
@ -0,0 +1,30 @@
+#include <Arduino.h>
+#include "ESP8266WiFi.h"
+
+#include <FastLED.h>
+
+static constexpr uint8_t LED_PIN = D2;
+static constexpr uint8_t PIR_PIN = D1;
+uint16_t brightness = 96;
+uint16_t speed = 20;
+#define LED_TYPE	WS2812
+#define COLOR_ORDER	GRB
+
+static constexpr uint8_t NUM_LEDS = 50;
+
+CRGB leds[NUM_LEDS];
+
+uint8_t noise[NUM_LEDS];
+
+CRGBPalette16 currentPalette( PartyColors_p );
+
+void setup() {
+  Serial.begin(115200);
+
+  WiFi.mode(WIFI_STA);
+  delay(100);
+}
+
+void loop() {
+  delay(5000);
+}
--- a/src/main_esp32.cpp
+++ b/src/main_esp32.cpp
@ -1,34 +0,0 @@
-/* Hello World Example
-
-   This example code is in the Public Domain (or CC0 licensed, at your option.)
-
-   Unless required by applicable law or agreed to in writing, this
-   software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
-   CONDITIONS OF ANY KIND, either express or implied.
-*/
-
-#ifdef ESP32
-#include <stdio.h>
-#include "freertos/FreeRTOS.h"
-#include "freertos/task.h"
-#include "esp_system.h"
-#include "nvs_flash.h"
-
-void hello_task(void *pvParameter)
-{
-    printf("Hello world!\n");
-    for (int i = 10; i >= 0; i--) {
-        printf("Restarting in %d seconds...\n", i);
-        vTaskDelay(1000 / portTICK_RATE_MS);
-    }
-    printf("Restarting now.\n");
-    fflush(stdout);
-    esp_restart();
-}
-
-extern "C" void app_main()
-{
-    nvs_flash_init();
-    xTaskCreate(&hello_task, "hello_task", 2048, NULL, 5, NULL);
-}
-#endif
--- a/src/main_esp8266.cpp
+++ b/src/main_esp8266.cpp
@ -1,85 +0,0 @@
-#ifdef ESP8266
-#include "esp_common.h"
-
-#include "freertos/FreeRTOS.h"
-#include "freertos/task.h"
-
-#include <FastLED.h>
-
-static constexpr uint8_t LED_PIN = D2;
-static constexpr uint8_t PIR_PIN = D1;
-uint16_t brightness = 96;
-uint16_t speed = 20;
-#define LED_TYPE	WS2812
-#define COLOR_ORDER	GRB
-
-static constexpr uint8_t NUM_LEDS = 50;
-
-CRGB leds[NUM_LEDS];
-
-uint8_t noise[NUM_LEDS];
-
-CRGBPalette16 currentPalette( PartyColors_p );
-
-/******************************************************************************
- * FunctionName : user_rf_cal_sector_set
- * Description  : SDK just reversed 4 sectors, used for rf init data and paramters.
- *                We add this function to force users to set rf cal sector, since
- *                we don't know which sector is free in user's application.
- *                sector map for last several sectors : ABCCC
- *                A : rf cal
- *                B : rf init data
- *                C : sdk parameters
- * Parameters   : none
- * Returns      : rf cal sector
-*******************************************************************************/
-extern "C" uint32 user_rf_cal_sector_set(void)
-{
-    flash_size_map size_map = system_get_flash_size_map();
-    uint32 rf_cal_sec = 0;
-
-    switch (size_map) {
-        case FLASH_SIZE_4M_MAP_256_256:
-            rf_cal_sec = 128 - 5;
-            break;
-
-        case FLASH_SIZE_8M_MAP_512_512:
-            rf_cal_sec = 256 - 5;
-            break;
-
-        case FLASH_SIZE_16M_MAP_512_512:
-        case FLASH_SIZE_16M_MAP_1024_1024:
-            rf_cal_sec = 512 - 5;
-            break;
-
-        case FLASH_SIZE_32M_MAP_512_512:
-        case FLASH_SIZE_32M_MAP_1024_1024:
-            rf_cal_sec = 1024 - 5;
-            break;
-        case FLASH_SIZE_64M_MAP_1024_1024:
-            rf_cal_sec = 2048 - 5;
-            break;
-        case FLASH_SIZE_128M_MAP_1024_1024:
-            rf_cal_sec = 4096 - 5;
-            break;
-        default:
-            rf_cal_sec = 0;
-            break;
-    }
-
-    return rf_cal_sec;
-}
-
-extern "C" void ICACHE_FLASH_ATTR user_init()
-{
-  os_printf("SDK version:%s\n", system_get_sdk_version());
-
-  LEDS.addLeds<LED_TYPE,LED_PIN,COLOR_ORDER>(leds,NUM_LEDS);
-  LEDS.setBrightness(brightness);
-
-  loop();
-}
-
-void loop() {
-}
-#endif
--- a/src/sdkconfig.h
+++ b/src/sdkconfig.h
@ -1,125 +0,0 @@
-/*
- *
- * Automatically generated file; DO NOT EDIT.
- * Espressif IoT Development Framework Configuration
- *
- */
-#define CONFIG_GATTC_ENABLE 1
-#define CONFIG_ESP32_PHY_MAX_TX_POWER 20
-#define CONFIG_PHY_ENABLED 1
-#define CONFIG_TRACEMEM_RESERVE_DRAM 0x0
-#define CONFIG_FREERTOS_MAX_TASK_NAME_LEN 16
-#define CONFIG_BLE_SMP_ENABLE 1
-#define CONFIG_IPC_TASK_STACK_SIZE 1024
-#define CONFIG_ESPTOOLPY_FLASHFREQ "40m"
-#define CONFIG_NEWLIB_STDOUT_ADDCR 1
-#define CONFIG_TASK_WDT_CHECK_IDLE_TASK 1
-#define CONFIG_ESPTOOLPY_FLASHSIZE "2MB"
-#define CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER 1
-#define CONFIG_ETHERNET 1
-#define CONFIG_INT_WDT 1
-#define CONFIG_ESPTOOLPY_FLASHFREQ_40M 1
-#define CONFIG_LOG_BOOTLOADER_LEVEL_INFO 1
-#define CONFIG_ESPTOOLPY_FLASHSIZE_2MB 1
-#define CONFIG_AWS_IOT_MQTT_PORT 8883
-#define CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS 1
-#define CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM 10
-#define CONFIG_LOG_DEFAULT_LEVEL_INFO 1
-#define CONFIG_BT_RESERVE_DRAM 0x10000
-#define CONFIG_ESP32_PANIC_PRINT_REBOOT 1
-#define CONFIG_CONSOLE_UART_BAUDRATE 115200
-#define CONFIG_LWIP_MAX_SOCKETS 10
-#define CONFIG_EMAC_TASK_PRIORITY 20
-#define CONFIG_TIMER_TASK_STACK_DEPTH 2048
-#define CONFIG_FATFS_CODEPAGE 1
-#define CONFIG_ESP32_DEFAULT_CPU_FREQ_160 1
-#define CONFIG_ULP_COPROC_RESERVE_MEM 0
-#define CONFIG_ESPTOOLPY_BAUD 115200
-#define CONFIG_INT_WDT_CHECK_CPU1 1
-#define CONFIG_FLASHMODE_DIO 1
-#define CONFIG_ESPTOOLPY_AFTER_RESET 1
-#define CONFIG_TOOLPREFIX "xtensa-esp32-elf-"
-#define CONFIG_FREERTOS_IDLE_TASK_STACKSIZE 1024
-#define CONFIG_ESP32_WIFI_AMPDU_ENABLED 1
-#define CONFIG_CONSOLE_UART_NUM 0
-#define CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC 1
-#define CONFIG_ESPTOOLPY_BAUD_115200B 1
-#define CONFIG_LWIP_THREAD_LOCAL_STORAGE_INDEX 0
-#define CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS 1
-#define CONFIG_CONSOLE_UART_DEFAULT 1
-#define CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN 16384
-#define CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS 4
-#define CONFIG_ESPTOOLPY_FLASHSIZE_DETECT 1
-#define CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE 1
-#define CONFIG_BTDM_CONTROLLER_RUN_CPU 0
-#define CONFIG_TCPIP_TASK_STACK_SIZE 2560
-#define CONFIG_TASK_WDT 1
-#define CONFIG_MAIN_TASK_STACK_SIZE 4096
-#define CONFIG_TASK_WDT_TIMEOUT_S 5
-#define CONFIG_INT_WDT_TIMEOUT_MS 300
-#define CONFIG_ESPTOOLPY_FLASHMODE "dio"
-#define CONFIG_BTC_TASK_STACK_SIZE 3072
-#define CONFIG_BLUEDROID_ENABLED 1
-#define CONFIG_ESPTOOLPY_BEFORE "default_reset"
-#define CONFIG_LOG_DEFAULT_LEVEL 3
-#define CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION 1
-#define CONFIG_TIMER_QUEUE_LENGTH 10
-#define CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM 32
-#define CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER 20
-#define CONFIG_ESP32_RTC_CLK_CAL_CYCLES 1024
-#define CONFIG_ESP32_WIFI_NVS_ENABLED 1
-#define CONFIG_AWS_IOT_SDK 1
-#define CONFIG_DMA_RX_BUF_NUM 10
-#define CONFIG_TCP_SYNMAXRTX 6
-#define CONFIG_PYTHON "python"
-#define CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1 1
-#define CONFIG_ESPTOOLPY_COMPRESSED 1
-#define CONFIG_PARTITION_TABLE_FILENAME "partitions_singleapp.csv"
-#define CONFIG_LWIP_DHCP_MAX_NTP_SERVERS 1
-#define CONFIG_PARTITION_TABLE_SINGLE_APP 1
-#define CONFIG_WIFI_ENABLED 1
-#define CONFIG_LWIP_DHCP_DOES_ARP_CHECK 1
-#define CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE 4096
-#define CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY 2000
-#define CONFIG_ESP32_APPTRACE_DEST_NONE 1
-#define CONFIG_PARTITION_TABLE_CUSTOM_APP_BIN_OFFSET 0x10000
-#define CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM 32
-#define CONFIG_FATFS_CODEPAGE_ASCII 1
-#define CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1 1
-#define CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ 160
-#define CONFIG_FREERTOS_HZ 100
-#define CONFIG_LOG_COLORS 1
-#define CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE 1
-#define CONFIG_FREERTOS_ASSERT_FAIL_ABORT 1
-#define CONFIG_ESP32_XTAL_FREQ 0
-#define CONFIG_MONITOR_BAUD_115200B 1
-#define CONFIG_LOG_BOOTLOADER_LEVEL 3
-#define CONFIG_SMP_ENABLE 1
-#define CONFIG_ESPTOOLPY_BEFORE_RESET 1
-#define CONFIG_ESPTOOLPY_BAUD_OTHER_VAL 115200
-#define CONFIG_ESP32_XTAL_FREQ_AUTO 1
-#define CONFIG_TCP_MAXRTX 12
-#define CONFIG_ESPTOOLPY_AFTER "hard_reset"
-#define CONFIG_DMA_TX_BUF_NUM 10
-#define CONFIG_ESP32_DEBUG_OCDAWARE 1
-#define CONFIG_TIMER_TASK_PRIORITY 1
-#define CONFIG_BT_ENABLED 1
-#define CONFIG_MONITOR_BAUD 115200
-#define CONFIG_FREERTOS_CORETIMER_0 1
-#define CONFIG_PARTITION_TABLE_CUSTOM_FILENAME "partitions.csv"
-#define CONFIG_MBEDTLS_HAVE_TIME 1
-#define CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY 1
-#define CONFIG_GATTS_ENABLE 1
-#define CONFIG_FREERTOS_ISR_STACKSIZE 1536
-#define CONFIG_OPENSSL_ASSERT_DO_NOTHING 1
-#define CONFIG_AWS_IOT_MQTT_HOST ""
-#define CONFIG_SYSTEM_EVENT_QUEUE_SIZE 32
-#define CONFIG_BT_ACL_CONNECTIONS 4
-#define CONFIG_FATFS_MAX_LFN 255
-#define CONFIG_ESP32_WIFI_TX_BUFFER_TYPE 1
-#define CONFIG_APP_OFFSET 0x10000
-#define CONFIG_MEMMAP_SMP 1
-#define CONFIG_SPI_FLASH_ROM_DRIVER_PATCH 1
-#define CONFIG_MONITOR_BAUD_OTHER_VAL 115200
-#define CONFIG_ESPTOOLPY_PORT "/dev/ttyUSB0"
-#define CONFIG_OPTIMIZATION_LEVEL_RELEASE 1
Author	SHA1	Message	Date
Hendrik Langer	b6dbf6f749	fix CI output directory	7 years ago
Hendrik Langer	be2c11051a	example code	7 years ago
Hendrik Langer	13fc357565	switch to arduino framework due to FastLED depending on Arduino	7 years ago