esp-weatherstation/src/main.cpp

/*
 * WetterStation
 * Version: 0.0
 * Author: Hendrik Langer <hendrik+dev@xd0.de>
 */

#include <Arduino.h>
#include <ESP8266WiFi.h>
#include <ESP8266WiFiMulti.h>

#include <ESP8266HTTPClient.h>
#include <ArduinoJson.h>

#include <Wire.h>
#include <SPI.h>
#include <Adafruit_Sensor.h>
#include <Adafruit_BMP085_U.h>
#include <DHT.h>

#include <SDS011.h>

const char* server = "ingress.opensensemap.org";
//const char* ssid = "Freifunk";
//const char* password = "";

constexpr unsigned int postingInterval = 60000; //Uploadintervall in Millisekunden

//senseBox ID
#define SENSEBOX_ID "5a9e9e38f55bff001a494877"

//Sensor IDs
// Temperature
#define SENSOR1_ID "5a9e9e38f55bff001a49487e"
// Humidity
#define SENSOR2_ID "5a9e9e38f55bff001a49487d"
// Pressure
#define SENSOR3_ID "5a9e9e38f55bff001a49487c"
// PM10
#define SENSOR4_ID "5a9e9e38f55bff001a49487b"
// PM2.5
#define SENSOR5_ID "5a9e9e38f55bff001a49487a"
// Radioactivity
#define SENSOR6_ID "5a9e9e38f55bff001a494879"
// Voltage
#define SENSOR7_ID "5a9e9e38f55bff001a494878"
// RSSI
#define SENSOR8_ID "5a9eddb1f55bff001a51de52"


static constexpr uint8_t BMP_SCL = D4;
static constexpr uint8_t BMP_SDA = D3;

static constexpr uint8_t DHT22_PIN = D7;
static constexpr uint8_t DHTTYPE = DHT22; // DHT 22 (AM2302)

static constexpr uint8_t SDS_TX = D1;
static constexpr uint8_t SDS_RX = D2;

static constexpr uint8_t GEIGER_PIN = D6;
static constexpr float CONV_FACTOR = 0.008120;
static constexpr unsigned long logging_period_ms = 60000;

ADC_MODE(ADC_VCC);

ESP8266WiFiMulti wifiMulti;

Adafruit_BMP085_Unified bmp = Adafruit_BMP085_Unified(10085);
DHT dht(DHT22_PIN, DHTTYPE);
SDS011 sds;
volatile unsigned long geiger_counts = 0;
unsigned long geiger_previousMillis;

void ICACHE_FLASH_ATTR sendValues() {
  WiFi.forceSleepWake();
  WiFi.mode(WIFI_STA);
  wifiMulti.addAP("nether.net", "password1");
  wifiMulti.addAP("LNet", "password2");
  wifiMulti.addAP("Freifunk", "");
  int tries = 0;
  while (wifiMulti.run() != WL_CONNECTED) {
    tries++;
    Serial.print(".");
    if (tries > 20) {
      Serial.println(" [ERROR]");
      Serial.println("Retrying in 1 minute..");
      delay(postingInterval);
      ESP.restart();
    }
    delay(500);
  }
  Serial.println(" [CONNECTED]");
  Serial.print("IP address: ");
  Serial.println(WiFi.localIP());

  float temperature = dht.readTemperature();
  float humidity = dht.readHumidity();

  float pressure, temp2;
  bmp.getPressure(&pressure);
  pressure /= 100;
  bmp.getTemperature(&temp2);

  float p10, p2_5;
  int sds_error = sds.read(&p2_5, &p10);
  if(!sds_error) {
//    Serial.println("SDS011 updated.");
  } else {
//    Serial.println("SDS011 no new values.");
  }

//  sds.sleep();

  unsigned long cpm = 0;
  float radiationValue = -1;
  if (millis() - geiger_previousMillis > logging_period_ms) {
    cpm = geiger_counts * 60000 / (millis() - geiger_previousMillis);
    geiger_previousMillis = millis();
    geiger_counts = 0;
    radiationValue = cpm * CONV_FACTOR;
//    Serial.println(cpm);
  } else {
//    Serial.println("Geiger Counter: no new value");
  }

                  Serial.printf("Temperature  : %6.2f°C    (DHT22)\n", temperature);
                  Serial.printf("Humidity     : %6.2f%     (DHT22)\n", humidity);
                  Serial.printf("Temperature  : %6.2f°C    (BMP180)\n", temp2);
                  Serial.printf("Pressure     : %6.2fhPa   (BMP180)\n", pressure);
  if (!sds_error) Serial.printf("Particles 10 : %6.2fµg/m³ (SDS011)\n", p10);
  if (!sds_error) Serial.printf("Particles 2.5: %6.2fµg/m³ (SDS011)\n", p2_5);
  if (cpm > 0)    Serial.printf("Radiation    : %6.2fµSv/h (J305)\n", radiationValue);

  DynamicJsonBuffer jsonBuffer;
  JsonArray& array = jsonBuffer.createArray();

  JsonObject& temperatureObject = array.createNestedObject();
  temperatureObject["sensor"] = SENSOR1_ID;
  temperatureObject["value"] = temperature;

  JsonObject& humidityObject = array.createNestedObject();
  humidityObject["sensor"] = SENSOR2_ID;
  humidityObject["value"] = humidity;

  JsonObject& pressureObject = array.createNestedObject();
  pressureObject["sensor"] = SENSOR3_ID;
  pressureObject["value"] = pressure;

  if (!sds_error) {
    JsonObject& pm10Object = array.createNestedObject();
    pm10Object["sensor"] = SENSOR4_ID;
    pm10Object["value"] = p10;

    JsonObject& pm25Object = array.createNestedObject();
    pm25Object["sensor"] = SENSOR5_ID;
    pm25Object["value"] = p2_5;

  }

  if (cpm > 0) {
    JsonObject& cpmObject = array.createNestedObject();
    cpmObject["sensor"] = SENSOR6_ID;
    cpmObject["value"] = radiationValue;
  }

  JsonObject& voltageObject = array.createNestedObject();
  voltageObject["sensor"] = SENSOR7_ID;
  voltageObject["value"] = ESP.getVcc()/1024.0;

  JsonObject& rssiObject = array.createNestedObject();
  rssiObject["sensor"] = SENSOR8_ID;
  rssiObject["value"] = WiFi.RSSI();


  char buffer[500];
  array.printTo(buffer, sizeof(buffer));

  int httpCode = 0;
  for (int tries=0; tries<3 && httpCode != HTTP_CODE_CREATED; tries++) {

    HTTPClient httpclient;
    char url[100];
    sprintf(url, "http://%s/boxes/%s/data", server, SENSEBOX_ID);

    httpclient.begin(url);
    httpclient.addHeader("Content-Type", "application/json");

    httpCode = httpclient.POST(buffer);

    if (httpCode > 0) {
      if (httpCode == HTTP_CODE_CREATED) {
        httpclient.writeToStream(&Serial);
        Serial.println();
      } else {
        Serial.printf("[HTTP] POST... failed, error: %s\n", httpclient.errorToString(httpCode).c_str());
      }
    }

    httpclient.end();

  }

  WiFi.disconnect();
  WiFi.mode(WIFI_OFF);
  WiFi.forceSleepBegin();

}

void ICACHE_RAM_ATTR ISR_geiger_impulse() {
  geiger_counts++;
}


void setup() {
  Serial.begin(115200);

  sds.begin(SDS_TX, SDS_RX);
  sds.mode_mon_300();

  Wire.begin(BMP_SDA, BMP_SCL);
  if (!bmp.begin(BMP085_MODE_STANDARD)) {
    Serial.println("No valid BMP085 sensor!");
  }

  dht.begin();

  pinMode(GEIGER_PIN, INPUT);
  attachInterrupt(digitalPinToInterrupt(GEIGER_PIN), ISR_geiger_impulse, FALLING);
}

void loop() {
  sendValues();
  delay(postingInterval);
}