esp32-weatherstation/esp32weatherstation2.yaml

esphome:
  name: esp32weatherstation2
  platform: ESP32
  board: lolin_d32_pro
  includes:
    - veml6075_custom_sensor.h
  libraries:
    - "https://github.com/adafruit/Adafruit_VEML6075"
    - "https://github.com/adafruit/Adafruit_BusIO"
  platformio_options:
    lib_ldf_mode: chain+
  project:
    name: "xd0.esp32weatherstation2"
    version: "0.0.3"

# Enable logging
logger:
#  level: VERY_VERBOSE

# Enable Home Assistant API
api:

ota:
  password: !secret esphome_ota_password
#  on_begin:
#    then:
#      - logger.log: "OTA start"

wifi:
  networks:
  - ssid: !secret wifi_ssid
    password: !secret wifi_passwd
  - ssid: !secret wifi_ssid2
    password: !secret wifi_passwd2
  power_save_mode: light

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Esp32Weatherstation2"
    password: "ucYwmU1xwUxh"

captive_portal:

time:
  - platform: sntp
    id: sntp_time
    timezone: "Europe/Berlin"

#mqtt:
#  broker: home.xd0.de
#  username: !secret esphome_mqtt_user
#  password: !secret esphome_mqtt_passwd

i2c:
  sda: 21
  scl: 22
  scan: true

spi:
  clk_pin: 18
  mosi_pin: 23
  miso_pin: 19

uart:
  rx_pin: 15
  tx_pin: 2
  baud_rate: 9600

# display #250x122 pixels
font:
  - file: 'fonts/Vera.ttf'
    id: font1
    size: 10
  - file: 'fonts/Vera.ttf'
    id: font2
    size: 20
#  - file: 'fonts/VeraMono.ttf'
#    id: font3
#    size: 10

status_led:
  pin:
    number: GPIO5
    inverted: true

display:
  - platform: waveshare_epaper
    cs_pin: 14
    dc_pin: 27
    reset_pin: 33
    model: 2.13in-ttgo
    rotation: 90
    update_interval: 30s
    full_update_every: 1
    id: my_display
    pages:
#      - id: page1
#        lambda: |-
#          it.print(10, 10, id(font2), "esp32weatherstation2");
      - id: page2
        lambda: |-
          it.print(5, 6, id(font1), "Hello World!");
          it.strftime(150, 6, id(font1), "%Y-%m-%d %H:%M", id(sntp_time).now());
          it.line(0, 20, 250, 20);
          it.filled_rectangle(0, 20, 70, 122, COLOR_ON);
          it.line(0, 54, 70, 54, COLOR_OFF);
          it.line(0, 88, 70, 88, COLOR_OFF);
          if (id(temperature).state) {
            it.printf(2, 21+4, id(font2), COLOR_OFF, "%.1f", id(temperature).state); it.printf(55, 21+4, id(font1), COLOR_OFF, "°C");
            it.printf(2, 55+4, id(font2), COLOR_OFF, "%.1f", id(humidity).state);  it.printf(55, 55+4, id(font1), COLOR_OFF, "%%");
            it.printf(2, 89+4, id(font2), COLOR_OFF, "%.0f", id(pressure).state); it.printf(55, 89+4, id(font1), COLOR_OFF, "hPa");
            it.graph(70, 21, id(temperature_graph));
            it.graph(70, 55, id(humidity_graph));
            it.graph(70, 89, id(pressure_graph));
          } else if (id(temperature2).state) {
            it.printf(2, 21+4, id(font2), COLOR_OFF, "%.1f", id(temperature2).state); it.printf(55, 21+4, id(font1), COLOR_OFF, "°C");
            it.printf(2, 55+4, id(font2), COLOR_OFF, "%.1f", id(humidity2).state);  it.printf(55, 55+4, id(font1), COLOR_OFF, "%%");
            it.printf(2, 89+4, id(font2), COLOR_OFF, "%.0f", id(pressure2).state); it.printf(55, 89+4, id(font1), COLOR_OFF, "hPa");
          }
          it.printf(133, 21, id(font1), "PM2.5: %.1f", id(pm2).state);
          it.printf(133, 31, id(font1), "PM10 : %.1f", id(pm10).state);
          it.printf(133, 41, id(font1), "VOC  : %.1f k\xe9", id(voc).state);
          it.printf(133, 51, id(font1), "Lux  : %.1f lx", id(lux).state);
#          it.printf(130, 61, id(font1), "UVI  : %.1f", id(uva).state);
#          it.printf(130, 71, id(font1), "UVA  : %.1f", id(uva).state);
#          it.printf(130, 81, id(font1), "UVB  : %.1f", id(uvb).state);

graph:
  # Show bare-minimum auto-ranged graph
  - id: temperature_graph
    sensor: temperature
    duration: 1h
    width: 60
    height: 32
  - id: humidity_graph
    sensor: humidity
    duration: 1h
    width: 60
    height: 32
  - id: pressure_graph
    sensor: pressure
    duration: 1h
    width: 60
    height: 32

sensor:
# BME680 Temperature+Pressure+Humidity+Gas Sensor
  - platform: bme680
    temperature:
      name: "BME680 Temperature"
      oversampling: 16x
      id: temperature
    pressure:
      name: "BME680 Pressure"
      id: pressure
    humidity:
      name: "BME680 Humidity"
      id: humidity
    gas_resistance:
      name: "BME680 Gas Resistance"
      id: voc
    address: 0x77
    update_interval: 60s
# BME280 Temperature+Pressure+Humidity Sensor
  - platform: bme280
    temperature:
      name: "BME280 Temperature"
      id: temperature2
      oversampling: 16x
    pressure:
      name: "BME280 Pressure"
      id: pressure2
    humidity:
      name: "BME280 Humidity"
      id: humidity2
    address: 0x77
    update_interval: 60s
# SDS 011 Particulate Matter Sensor
  - platform: sds011
    pm_2_5:
      name: "Particulate Matter <2.5µm Concentration"
      id: pm2
    pm_10_0:
      name: "Particulate Matter <10.0µm Concentration"
      id: pm10
    update_interval: 5min
# BH1750 Ambient Light Sensor
  - platform: bh1750
    name: "BH1750 Illuminance"
    id: lux
    address: 0x23
    measurement_duration: 69
    update_interval: 60s
# VEML6075 UV sensor
#  - platform: custom
#    lambda: |-
#      auto veml6075 = new VEML6075CustomSensor();
#      App.register_component(veml6075);
#      return {veml6075->uva_sensor, veml6075->uvb_sensor};
#    sensors:
#    - name: "zelva UVA"
#      id: uva
#      unit_of_measurement: "mW/cm²"
#      accuracy_decimals: 0
#    - name: "zelva UVB"
#      id: uvb
#      unit_of_measurement: "mW/cm²"
#      accuracy_decimals: 0
# ESP32 integrated hall sensor
#  - platform: esp32_hall
#    name: "ESP32 Hall Sensor"
#    update_interval: 60s
#  - platform: ble_rssi
#    mac_address: FA:4E:84:FF:4D:16
#    name: "MiBand Hendrik RSSI value"

# Example configuration entry
# esp32_ble_tracker:

#text_sensor:
#  - platform: ble_scanner
#    name: "BLE Devices Scanner"

#on_...:
#  if:
#    condition:
#      api.connected:
#    then:
#      - logger.log: API is connected!
#      - display.page.show: page2