hendrik
/
wordclock
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
Browse Source

borg_hw_led_tester.c etc.: adjustable power consumption

feature/2015
Christian Kroll 10 years ago
parent
0fbadb7012
commit
e526b4dd4d
4 changed files with 72 additions and 36 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 18
      config.in
  2. 49
      src/borg_hw/borg_hw_led_tester.c
  3. 2
      src/borg_hw/config_borg_led_tester.in
  4. 39
      src/uart/uart_commands.c

18
config.in
View File

@ -7,23 +7,27 @@ comment "General Setup"
choice 'Target MCU' \
"ATmega8 atmega8 \
ATmega16 atmega16 \
ATmega164 atmega164 \
ATmega164P atmega164p \
ATmega48 atmega48 \
ATmega48P atmega48p \
ATmega88 atmega88 \
ATmega88P atmega88p \
ATmega168 atmega168 \
ATmega168P atmega168p \
ATmega328 atmega328 \
ATmega328P atmega328p \
ATmega16 atmega16 \
ATmega32 atmega32 \
ATmega164 atmega164 \
ATmega164P atmega164p \
ATmega324 atmega324 \
ATmega324P atmega324p \
ATmega32U4 atmega32u4 \
ATmega328 atmega328 \
ATmega328P atmega328p \
ATmega644 atmega644 \
ATmega644P atmega644p \
ATmega1280 atmega1280 \
ATmega1284 atmega1284 \
ATmega1284P atmega1284p \
ATmega1280 atmega1280 \
ATmega2560 atmega2560 \
ATmega32U4 atmega32u4 \
ATmega8515 atmega8515" \
'ATmega32' MCU

49
src/borg_hw/borg_hw_led_tester.c
View File

@ -1,6 +1,7 @@
#include "../config.h"
#include "../makros.h"
#include <stdbool.h>
#include <avr/interrupt.h>
#include <avr/io.h>
#include <avr/wdt.h>
@ -21,23 +22,27 @@
# define TIMER0_COMPARE(t) OCR0A = t
# define TIMER0_INT_ENABLE() TIMSK0 = _BV(OCIE0A)
# define TIMER0_ISR TIMER0_COMPA_vect
#else // ATmega8
#elif defined(__AVR_ATmega8__) || \
defined(__AVR_ATmega8A__) // ATmega8
# define TIMER0_OFF() TCCR0 = 0
# define TIMER0_MODE_CS256() TCCR0 = _BV(CS02)
# define TIMER0_RESET() TCNT0 = 0
# define TIMER0_COMPARE(t) TCNT0 = (0xff - t)
# define TIMER0_INT_ENABLE() TIMSK = _BV(TOIE0)
# define TIMER0_ISR TIMER0_OVF_vect
#else
# error MCU not supported by LED Tester.
#endif
bool g_highpower = false;
/* Output data of the current row to the column drivers:
* Column: 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
* Pin: PD2 PD3 PC5 PC4 PC3 PC2 PC1 PC0 PD7 PD6 PB5 PB4 PB3 PB2 PB1 PB0
*/
#define DISPLAY_PINS_B (_BV(PB5)|_BV(PB4)|_BV(PB3)|_BV(PB2)|_BV(PB1)|_BV(PB0))
#define DISPLAY_PINS_C (_BV(PC5)|_BV(PC4)|_BV(PC3)|_BV(PC2)|_BV(PC1)|_BV(PC0))
#define DISPLAY_PINS_D (_BV(PD7)|_BV(PD6)|_BV(PD3)|_BV(PD2))
#define DISPLAY_B (_BV(PB5)|_BV(PB4)|_BV(PB3)|_BV(PB2)|_BV(PB1)|_BV(PB0))
#define DISPLAY_C (_BV(PC5)|_BV(PC4)|_BV(PC3)|_BV(PC2)|_BV(PC1)|_BV(PC0))
#define DISPLAY_D (_BV(PD7)|_BV(PD6)|_BV(PD3)|_BV(PD2))
#define ROW_DUMMY_PORT PORTB
#define ROW_DUMMY_DDR DDRB
@ -53,9 +58,9 @@ unsigned char pixmap[NUMPLANE][NUM_ROWS][LINEBYTES];
// switch to next row
static void nextrow(uint8_t row) {
// switch off all columns for now
PORTB &= ~(DISPLAY_PINS_B);
PORTC &= ~(DISPLAY_PINS_C);
PORTD &= ~(DISPLAY_PINS_D);
PORTB &= ~(DISPLAY_B);
PORTC &= ~(DISPLAY_C);
PORTD &= ~(DISPLAY_D);
// short delay loop, to ensure proper deactivation of the drivers
unsigned char i;
@ -69,8 +74,10 @@ static void nextrow(uint8_t row) {
ROW_LED_PORT |= _BV(ROW_LED_PIN); // unblock LED MOSFET
} else { /* fake rows simulated by resistors */
// remaining rows: unblock resistor MOSFET, block LED MOSFET
ROW_LED_PORT &= ~_BV(ROW_LED_PIN); // block LED MOSFET
ROW_DUMMY_PORT |= _BV(ROW_DUMMY_PIN); // block resistor MOSFET
ROW_LED_PORT &= ~_BV(ROW_LED_PIN); // block LED MOSFET
if (g_highpower) {
ROW_DUMMY_PORT |= _BV(ROW_DUMMY_PIN); // unblock resistor MOSFET
}
}
// another delay loop, to ensure that the drivers are ready
@ -92,9 +99,9 @@ static void rowshow(unsigned char row, unsigned char plane) {
TIMER0_COMPARE(ocr_table[plane]);
uint8_t port_b = (PORTB & ~DISPLAY_PINS_B) | (0x3f & pixmap[plane][row][0]);
uint8_t port_c = (PORTC & ~DISPLAY_PINS_C) | (0x3f & pixmap[plane][row][1]);
uint8_t port_d = (PORTD & ~DISPLAY_PINS_D) | (0xc0 & pixmap[plane][row][0]);
uint8_t port_b = (PORTB & ~DISPLAY_B) | (DISPLAY_B & pixmap[plane][row][0]);
uint8_t port_c = (PORTC & ~DISPLAY_C) | (DISPLAY_C & pixmap[plane][row][1]);
uint8_t port_d = (PORTD & ~DISPLAY_D) | (0xc0 & pixmap[plane][row][0]);
if (0x40u & pixmap[plane][row][1]) port_d |= _BV(PD3);
if (0x80u & pixmap[plane][row][1]) port_d |= _BV(PD2);
@ -130,9 +137,9 @@ ISR(TIMER0_ISR) {
void timer0_off() {
cli();
// switch off all columns
PORTB &= ~(DISPLAY_PINS_B);
PORTC &= ~(DISPLAY_PINS_C);
PORTD &= ~(DISPLAY_PINS_D);
PORTB &= ~(DISPLAY_B);
PORTC &= ~(DISPLAY_C);
PORTD &= ~(DISPLAY_D);
TIMER0_OFF();
sei();
}
@ -149,16 +156,16 @@ static void timer0_on() {
void borg_hw_init() {
// switch column and row ports to output mode
DDRB |= DISPLAY_PINS_B;
DDRC |= DISPLAY_PINS_C;
DDRD |= DISPLAY_PINS_D;
DDRB |= DISPLAY_B;
DDRC |= DISPLAY_C;
DDRD |= DISPLAY_D;
ROW_DUMMY_DDR |= _BV(ROW_DUMMY_PIN);
ROW_LED_DDR |= _BV(ROW_LED_PIN);
// switch off all columns for now
PORTB &= ~(DISPLAY_PINS_B);
PORTC &= ~(DISPLAY_PINS_C);
PORTD &= ~(DISPLAY_PINS_D);
PORTB &= ~(DISPLAY_B);
PORTC &= ~(DISPLAY_C);
PORTD &= ~(DISPLAY_D);
// switch off all rows
ROW_DUMMY_PORT &= ~_BV(ROW_DUMMY_PIN);

2
src/borg_hw/config_borg_led_tester.in
View File

@ -1,6 +1,8 @@
mainmenu_option next_comment
comment "LED Tester Setup"
define_int LED_TESTER 1
bool "Higher Contrast" HIGH_CONTRAST n
bool "UART Support" UART_SUPPORT n

39
src/uart/uart_commands.c
View File

@ -19,6 +19,10 @@
#include "uart.h"
#include "uart_commands.h"
#ifdef LED_TESTER
extern bool g_highpower;
#endif
#ifndef USE_UART1
# define UART_PUTS(STR) uart_puts(STR)
# define UART_PUTS_P(STR) uart_puts_p(STR)
@ -34,7 +38,7 @@
#ifdef SCROLLTEXT_BUFFER_SIZE
# define UART_BUFFER_SIZE (SCROLLTEXT_BUFFER_SIZE + 8)
#else
# define UART_BUFFER_SIZE 136
# define UART_BUFFER_SIZE 32
#endif
char g_rx_buffer[UART_BUFFER_SIZE];
@ -48,7 +52,7 @@ extern volatile unsigned char reverseMode;
#if (!(defined(eeprom_update_block) && \
((E2PAGESIZE == 2) || (E2PAGESIZE == 4) || (E2PAGESIZE == 8)))) || \
!(defined(ANIMATION_TESTS))
!defined(ANIMATION_TESTS) || !(defined(SCROLLTEXT_SUPPORT))
char const UART_STR_NOTIMPL[] PROGMEM = "Not implemented."CR;
#endif
@ -62,9 +66,14 @@ char const UART_STR_GAMETX_ERR[] PROGMEM = "No text messages during games."CR;
char const UART_STR_UART_ERR[] PROGMEM = "Transmission error."CR;
char const UART_STR_UNKNOWN[] PROGMEM = "Unknown command or syntax error."CR;
char const UART_STR_TOOLONG[] PROGMEM = CR"Command is too long."CR;
#ifdef LED_TESTER
char const UART_STR_HELP[] PROGMEM = "Allowed commands: erase help mode "
"msg next power_lo power_hi prev "
"reset scroll test"CR;
#else
char const UART_STR_HELP[] PROGMEM = "Allowed commands: erase help mode "
"msg next prev reset scroll test"CR;
#endif
char const UART_CMD_ERASE[] PROGMEM = "erase";
char const UART_CMD_HELP[] PROGMEM = "help";
char const UART_CMD_MODE[] PROGMEM = "mode";
@ -74,6 +83,10 @@ char const UART_CMD_PREV[] PROGMEM = "prev";
char const UART_CMD_RESET[] PROGMEM = "reset";
char const UART_CMD_SCROLL[] PROGMEM = "scroll ";
char const UART_CMD_TEST[] PROGMEM = "test";
#ifdef LED_TESTER
char const UART_CMD_PWRLO[] PROGMEM = "power_lo";
char const UART_CMD_PWRHI[] PROGMEM = "power_hi";
#endif
#ifdef ANIMATION_TESTS
char const UART_STR_TEST_EXIT[] PROGMEM = "Press ENTER to exit test."CR;
@ -178,6 +191,8 @@ static void uartcmd_simple_message(void) {
#endif
uartcmd_permit();
}
#else
UART_PUTS_P(UART_STR_NOTIMPL);
#endif
}
@ -186,24 +201,26 @@ static void uartcmd_simple_message(void) {
* Displays a message which may use the complete range of scrolltext commands.
*/
static void uartcmd_scroll_message(void) {
#ifdef SCROLLTEXT_SUPPORT
# ifdef SCROLLTEXT_SUPPORT
if (uartcmd_processing_allowed()) {
uartcmd_forbid();
#ifdef JOYSTICK_SUPPORT
# ifdef JOYSTICK_SUPPORT
if (waitForFire) {
waitForFire = 0;
#endif
# endif
// text must not be longer than the scroll text buffer
g_rx_buffer[7 + SCROLLTEXT_BUFFER_SIZE - 1] = 0;
scrolltext(&g_rx_buffer[7]);
#ifdef JOYSTICK_SUPPORT
# ifdef JOYSTICK_SUPPORT
waitForFire = 1;
} else {
UART_PUTS_P(UART_STR_GAMETX_ERR);
}
#endif
# endif
uartcmd_permit();
}
#else
UART_PUTS_P(UART_STR_NOTIMPL);
#endif
}
@ -504,6 +521,12 @@ void uartcmd_process(void) {
} else if ((!strncmp_P(g_rx_buffer, UART_CMD_TEST, 4)) &&
(g_rx_buffer[4] <= ' ')) {
uartcmd_test();
#ifdef LED_TESTER
} else if (!strncmp_P(g_rx_buffer, UART_CMD_PWRLO, UART_BUFFER_SIZE)) {
g_highpower = false;
} else if (!strncmp_P(g_rx_buffer, UART_CMD_PWRHI, UART_BUFFER_SIZE)) {
g_highpower = true;
#endif
} else if (g_rx_buffer[0] != 0) {
UART_PUTS_P(UART_STR_UNKNOWN);
}

Write Preview
Loading…
Cancel
Save