fix millis()

src/XD0OTA.h

@@ -32,6 +32,10 @@ openssl req -x509 -nodes -days 18263 -newkey rsa:2048 -keyout /etc/ssl/private/x
 openssl x509 -noout -fingerprint -sha1 -inform pem -in /etc/ssl/certs/xd0-fwupdate-selfsigned.crt
 
 
+scp .pioenvs/nodemcuv2/firmware.bin user@webserver:/var/www/fwupdate/fota/macaddress.bin
+and change macaddress.version
+
+
 server {
     listen 444 ssl;
     listen [::]:444 ssl;

src/main.cpp

@@ -8,7 +8,7 @@
 #include <ESP8266WiFi.h>
 #include <ESP8266WiFiMulti.h>
 extern "C" {
-#include <espnow.h>
+//#include <espnow.h>
 #include "user_interface.h"
 }
 
@@ -36,7 +36,7 @@ const char* mqttserver = "home.xd0.de";
 const char* mqttusername = "esp-weatherstation";
 const char* mqttpassword = "password4";
 
-constexpr unsigned int postingInterval = 60000; //Uploadintervall in Millisekunden
+constexpr long postingInterval = 60000; //Uploadintervall in Millisekunden
 constexpr unsigned int dhcp_interval = 60*60*1000;
 
 int loop_count = 0;
@@ -97,6 +97,8 @@ IPAddress ip, dns, gateway, subnet;
 char ssid[64];
 char password[64];
 
+unsigned long previousMillis = 0;
+
 struct __attribute__((packed)) SENSOR_DATA {
   float temperature;
   float humidity;
@@ -366,12 +368,43 @@ void ICACHE_FLASH_ATTR sendValues() {
   WiFi.mode(WIFI_OFF);
   WiFi.forceSleepBegin();
   delay(1); // yield();
+}
 
+// WARNING: SOME TIME THE CALIBRATION VALUE CHANGES AND IT WILL RETURN A LOWER VALUE THAN BEFORE, BREAKING INTERVAL CHECKS!!!
+unsigned long getTime() {
+  uint64_t rtc_t = system_get_rtc_time();
+  uint32_t cal = system_rtc_clock_cali_proc();
+//  uint32_t timemicrosec = rtc_t*((uint64) ((cal * 1000) >> 12));
+//  Serial.printf("cal: %d.%d \r\n", ((cal*1000)>>12)/1000, ((cal*1000)>>12)%1000 );
+//  Serial.printf("cal: %u\n", cal);
+  return ((uint64_t)(rtc_t*(uint64_t)cal) >> 12)/1000;
 }
 
+void fpm_wakup_cb_func1(void) {
+  //gpio_pin_wakeup_disable();
+  //ESP.wdtFeed();
+  //wifi_fpm_do_wakeup();
+  wifi_fpm_close();
+  geiger_counts++;
+}
+
+void lightsleep() {
+  ESP.wdtFeed();
+  wifi_station_disconnect();
+  wifi_set_opmode(NULL_MODE);
+  wifi_fpm_set_sleep_type(LIGHT_SLEEP_T);
+  wifi_fpm_open(); // Enables force sleep
+  GPIO_DIS_OUTPUT(GPIO_ID_PIN(GEIGER_PIN));
+  PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTCK_U,FUNC_GPIO13); // PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTDI_U,FUNC_GPIO13);
+  gpio_pin_wakeup_enable(GPIO_ID_PIN(GEIGER_PIN), GPIO_PIN_INTR_LOLEVEL);
+  wifi_fpm_set_wakeup_cb(fpm_wakup_cb_func1);
+  wifi_fpm_do_sleep(0xFFFFFFF); // Sleep for longest possible time
+  //delay(1);
+}
 
 void ICACHE_RAM_ATTR ISR_geiger_impulse() {
   geiger_counts++;
+  //DEBUG_MSG("X");
 }
 
 // will be called every 6 seconds
@@ -390,6 +423,8 @@ void setup() {
   pinMode(LED_BUILTIN, OUTPUT);
   digitalWrite(LED_BUILTIN, HIGH);  // turn OFF board led
 
+  //ESP.wdtEnable(30000);
+
   sds.begin(SDS_TX, SDS_RX);
   sds.mode_mon_300();
 
@@ -401,18 +436,29 @@ void setup() {
   dht.begin();
 
   pinMode(GEIGER_PIN, INPUT);
-  attachInterrupt(digitalPinToInterrupt(GEIGER_PIN), ISR_geiger_impulse, FALLING);
+//  attachInterrupt(digitalPinToInterrupt(GEIGER_PIN), ISR_geiger_impulse, FALLING);
 
   geigeraverage.clear();
   geigeraverage.addValue(2);
-  os_timer_setfn(&Timer1, timerCallback, NULL);
+//  os_timer_setfn(&Timer1, timerCallback, NULL);
-  os_timer_arm(&Timer1, 6000, true);
+//  os_timer_arm(&Timer1, 6000, true);
+
+  previousMillis = millis();
 
   DEBUG_MSG("ready.\n"); Serial.flush();
 }
 
 void loop() {
-  //DEBUG_MSG("%d\n", millis() - last_wifi_activity);
+  unsigned long currentMillis = getTime();
+  if ((long)(currentMillis - previousMillis) >= postingInterval) {
+    DEBUG_MSG("sending values... previousMillis:%u, millis():%u, difference:%d\n", previousMillis, currentMillis, currentMillis-previousMillis);
     sendValues();
-  delay(postingInterval);
+    previousMillis = getTime();
+  }
+    DEBUG_MSG("sleeping now...\n");
+    delay(10);
+    lightsleep();
+    delay(10);
+//  delay(postingInterval);
+  //ESP.deepSleep(10e6);
 }