change rotary_btn pin, throw away arduino timeClient

src/hardware.h

@@ -8,7 +8,7 @@ static constexpr uint8_t buttonPin = 0;
 static constexpr uint8_t sensorPin = 0;
 static constexpr uint8_t rotaryPinA = 39;
 static constexpr uint8_t rotaryPinB = 38;
-static constexpr uint8_t rotaryPinButton = 22;
+static constexpr uint8_t rotaryPinButton = 17;
 static constexpr uint8_t ext_wakeup_pin_1 = 0;
 static constexpr uint8_t ext_wakeup_pin_2 = 0;
 
@@ -20,11 +20,11 @@ static constexpr uint32_t secondsToSleep = 3600;
  *               5V O                    O 5V
  *              3V3 O                    O 3V3
  *              GND O                    < 36           only input, no pullups
- *               RX * (3)             ?  * 17
+ *               RX * (3)                < 37           only input, no pullups
  *               TX * (1)                < 38 ROTARY_A  only input, no pullups
  *              RST * BUTTON             < 39 ROTARY_B  only input, no pullups
  *                0 * KEY_BUILTIN        < 34           only input, no pullups
- * ROTARY_BTN    22 *                    < 35           only input, no pullups
+ *               22 * ?                  < 35           only input, no pullups
  * BME280_SDO    19 * LoRa_MISO       ?  * 32
  * BME280_CS     23 *                 ?  * 33
  *               18 x LoRa_CS            * 25 MAX98_DIN
@@ -32,13 +32,13 @@ static constexpr uint32_t secondsToSleep = 3600;
  *               15 * OLED_SCL LoRa_MOSI * 27 BME280_SDA/SDI
  *                2 * LED_B     LoRa_RST * 14
  *                4 * OLED_SDA           * 12 MAX98_BCLK
- *               17 *                    * 13 MAX98_LRC
+ *    ROTARY_BTN 17 *                    * 13 MAX98_LRC
- *               16 * OLED_RST           * 21
+ *               16 * OLED_RST           * 21 WS2812B_DATA(?)
  */
 
 /* Rotary Encoder
  *           1 LED
- * pinA A    2 LED
+ * pinA A    2 LED         pinA und PinB mit externen Pullups
  * GND  C    3 BTN -|
  * pinB B    4 LED   /
  *           5 Vin -|	

src/main.cpp

@@ -15,8 +15,9 @@
 #include <Wire.h>
 #endif
 
-#include <WiFiUdp.h>
+#include <time.h>
-#include <NTPClient.h>
+#include <sys/time.h>
+#include "apps/sntp/sntp.h"
 
 #include "main.h"
 #include "hardware.h"
@@ -28,15 +29,13 @@
 U8G2_SSD1306_128X64_NONAME_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ 16, /* clock=*/ 15, /* data=*/ 4);
 
 
-char timeStr[20];
+char timeStr[64];
 char weatherStr[32];
 RTC_DATA_ATTR static int boot_count = 0;
 
 //Create a new Basecamp instance called iot
 Basecamp iot;
 
-WiFiUDP ntpUDP;
-NTPClient timeClient(ntpUDP, "de.pool.ntp.org", 3600, 60000);
 BME280 bme280;
 MP3 mp3;
 Rotary rotary;
@@ -60,12 +59,15 @@ void setup() {
 
   boot_count++;
 
-/*  time_t now;
+  time_t now;
   struct tm timeinfo;
   time(&now);
-  setenv("TZ", "GMT+1", 1);
+  setenv("TZ", "Europe/Berlin", 1);
   tzset();
-  localtime_r(&now, &timeinfo);*/
+  localtime_r(&now, &timeinfo);
+
+  //Initialize Basecamp
+  iot.begin();
 
   esp_sleep_wakeup_cause_t wakeup_reason = esp_sleep_get_wakeup_cause();
   switch(wakeup_reason) {
@@ -89,8 +91,11 @@ void setup() {
       break;
   }
 
-  //Initialize Basecamp
+char strftime_buf[64];
-  iot.begin();
+strftime(strftime_buf, sizeof(strftime_buf), "%c", &timeinfo);
+Serial.println(strftime_buf);
+
+
 
   u8g2.begin();
 //  delay(50);
@@ -122,8 +127,12 @@ void setup() {
   char ipStr[16];
   localIP.toString().toCharArray(ipStr, 16);
 
-  timeClient.begin();
+    if (timeinfo.tm_year < (2016 - 1900)) {
-  timeClient.update();
+        ESP_LOGI(TAG, "Time is not set yet. Connecting to WiFi and getting time over NTP.");
+        obtain_time();
+        // update 'now' variable with current time
+        time(&now);
+    }
 
   mp3.begin();
 
@@ -187,6 +196,25 @@ void suspend() {
 }
 
 
+void obtain_time(void) {
+    sntp_setoperatingmode(SNTP_OPMODE_POLL);
+    sntp_setservername(0, "de.pool.ntp.org");
+    sntp_init();
+
+    // wait for time to be set
+    time_t now = 0;
+    struct tm timeinfo = { 0 };
+    int retry = 0;
+    const int retry_count = 10;
+    while(timeinfo.tm_year < (2016 - 1900) && ++retry < retry_count) {
+        ESP_LOGI(TAG, "Waiting for system time to be set... (%d/%d)", retry, retry_count);
+        vTaskDelay(2000 / portTICK_PERIOD_MS);
+        time(&now);
+        localtime_r(&now, &timeinfo);
+    }
+}
+
+
 void rotation(int i, int direction, int buttonPressed) {
   if(millis() - lastButtonPress >= 300) {
     lastButtonPress = millis();
@@ -201,8 +229,16 @@ void loop()
 {
   if(millis() - lastUpdate >= 1000) {
     lastUpdate = millis();
-    timeClient.update();
+
-    timeClient.getFormattedTime().toCharArray(timeStr, 50);
+  time_t now;
+  struct tm timeinfo;
+  time(&now);
+  setenv("TZ", "Europe/Berlin", 1);
+  tzset();
+  localtime_r(&now, &timeinfo);
+
+strftime(timeStr, sizeof(timeStr), "%c", &timeinfo);
+Serial.println(timeStr);
 
     sprintf(weatherStr, "%.1f°C  %.1f%%  %.0fhPa", bme280.readTemperature(), bme280.readHumidity(), bme280.readPressure());
   }

src/main.h

@@ -8,3 +8,4 @@ void onMqttMessage(char* topic, char* payload, AsyncMqttClientMessageProperties
 void suspend();
 void loop();
 void rotation(int i, int direction, int buttonPressed);
+void obtain_time(void);