6.4 KiB

Raw Blame History

Anycubic Kossel Plus

Set-up guide and related things for the Anycubic Kossel Linear Plus 3D Printer.

Getting started

Build Marlin

git clone https://github.com/MarlinFirmware/Marlin.git -b 2.0.x
cd Marlin
cp config/examples/delta/Anycubic/Kossel/Configuration.h Marlin/
cp config/examples/delta/Anycubic/Kossel/Configuration_adv.h Marlin/

Adjust the Marlin/Configuration.h for your model:

#define ANYCUBIC_KOSSEL_PLUS
#define ANYCUBIC_PROBE_VERSION 2
#define ANYCUBIC_KOSSEL_ENABLE_BED 1

optional:

( #if ANYCUBIC_PROBE_VERSION == 2
#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -15.10 }
)

virtualenv -p python --no-site-packages .
source bin/activate
pip install -U platformio
pio run
pio run --target upload

Set up the 3d printer

Configuration > Advanced Settings > Initialize EEPROM
Configuration > Delta Calibration > Set Delta Height ( G33 P1 )
Configuration > Delta Configuration > Probe Z-offset ( Set manually to 15.10 )
Configuration > Delta Calibration > Set Delta Height ( G33 P1 )
connect the Z-Probe and start Configuration > Delta Calibration > Auto Calibration
Configuration > Delta Calibration > Store Settings
Motion > Bed Leveling > Level bed followed by Store Settings

use Configuration > Advanced Settings > Probe Z Offset to correct the difference and execute the calibration again

optional: tune PID

Nozzle

(DEFAULT_Kp 22.36 DEFAULT_Ki 1.63 DEFAULT_Kd 76.48)

run the following G-Code (e.g. in Proterface) with the nozzle cold: 'M106 S255' & 'M303 E0 C10 S200'
store measured values: 'M301 P17.96 I1.44 D55.90'

Bed

(DEFAULT_bedKp 374.03 DEFAULT_bedKi 72.47 DEFAULT_bedKd 482.59)

run 'M303 E-1 C8 S60'
store measured values: 'M304 P254.09 I44.31 D971.39'

store values in eeprom:

'M500'

Configure Cura

Cura Profiles

Download the profiles and put the json-Files into: $HOME/.local/share/cura/4.4/definitions/

Cura settings

Shell

alternate_extra_perimeter = True

Infill

infill_sparse_density = 10
infill_pattern = gyroid
zig_zaggify_infill = True

Material

material_print_temperature = 204
material_bed_temperature = 30
material_bed_temperature_layer_0 = 55
retraction_amount = 5
retraction_speed = 65

Speed

speed_print = 60
speed_layer_0 = 20
speed_equalize_flow_enabled = True
speed_z_hop = 60

Travel

retraction_combing = infill
retraction_combing_max_distance = 20
retraction_hop = 0.2
retraction_hop_enabled = True
retraction_hop_only_when_collides = True

Cooling

cool_fan_speed = 60
cool_fan_speed_0 = 20
cool_lift_head = True

Support

support_z_distance = 0.2
support_angle = 50

Build Plate Adhesion

adhesion_type = skirt
skirt_line_count = 2
skirt_brim_minimal_length = 250

Experimental

coasting_enable = True
bridge_settings_enabled = True

To test

line_width = 0.38 (for 0.15 else: 0.4)
optimize wall printing order = True
infill_enable_travel_optimization = True
use adaptive layers
print thin walls

Snippets

Firmware backup

avrdude -p m2560 -c avrispmkII -P /dev/ttyUSB0 -b 115200 -D -U flash:r:factory_kossel.hex:i
avrdude -p m2560 -c avrispmkII -P /dev/ttyUSB0 -b 115200 -D -U eeprom:r:factory_kossel_eeprom.hex:i

Litophanes:

3dp.rocks Image to Litophane Converter

TPU

Generally not enjoyable with bowden-type extruders. Buy another printer.

Print and mount the extruder mod, otherwise the filament will jam between the extruder gear and the Ptfe-tube.

Print slowly, not too small layer height, reduce retraction distance as it won't work anyways. Disable fan, disable heated bed.

Avoid models that require many travel moves.

Plotting

use Inkscape and the included Gcodetools. A 3d-printable pen holder (to use with rubber-bands) is attached in the addons/ folder.

Prepare Image

Make sure to have everything on a single layer
At the top bar leave units at px but treat them as mm!
scale object to desired size
Path -> Object to Path
Path -> Combine
Path -> Union
View -> Display mode -> Outline to preview
if there are too many nodes: Path -> Simplify

Gcodetools

Extensions -> Gcodetools -> Tools library... select default tool
- Diameter: 1.0
- Feed: 2400
- Penetration feed: 2400
- Passing feed: 3600
- Depth step: 1.0
Extensions -> Gcodetools -> Orientation points
- 2-points mode
- Z surface: 0.0
- Z depth: -1.0
move to center of object (0,0 is center of print-bed) and a bit to the right, as the pen is mounted right from the effector (45mm)
select object
`Extensions -> Gcodetools -> Path to Gcode
- Offset along Z axis: 11.0
- Z safe height for G00 move over blank: 3.0
- Units: mm

Print

home printer
print

Experimental Cura settings:

Layer Height: 10 mm
Initial Layer Height: 10 mm
Wall Line Count: 1
Top/Bottom Thickness: 10 mm
Print Thin Walls: True
Infill Density: 0 %
Default Printing Temperature: 0 °C
Build Plate Temperature: 0 °C
Enable Retraction: True
Retraction Minimum Travel: 2 mm
Combing Mode: off
Z Hop When Retracted: True
Z Hop Height: 2 mm
Enable Print Cooling: False
Generate Support: False
Build Plate Adhesion Type: none
Slicing Tolerance: Inclusive
Maximum Resolution: 0.2 mm

LEDs (WS2812)

print rails

and connect the led-strip to the trigorilla board at D11, +5V and GND

if you connect more than a few leds, a step-down converter is needed! don't supply them via the trigorilla's 5V rail.

In the Marlin/Configuration.h uncomment: #define NEOPIXEL_LED #define NEOPIXEL_TYPE NEO_GRB + NEO_KHZ800 #define NEOPIXEL_PIN 11 #define NEOPIXEL_PIXELS 35

In the Marlin/Configuration_adv.h uncomment: #define LED_CONTROL_MENU

Original Anycubic Links

https://github.com/ANYCUBIC-3D/ANYCUBIC_Kossel_Source_Code

6.4 KiB Raw Blame History