hendrik
/
wordclock
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
Browse Source

UART support for Borg16; using Peter Fleury's UART library

feature/2015
Christian Kroll 11 years ago
parent
c6fde40211
commit
fca9b8f07a
11 changed files with 1185 additions and 164 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 5
      config.in
  2. 162
      profiles/CTDO-Borg
  3. 13
      src/borg_hw/config_borg16.in
  4. 13
      src/main.c
  5. 16
      src/uart/Makefile
  6. 1
      src/uart/config.in
  7. 765
      src/uart/uart.c
  8. 226
      src/uart/uart.h
  9. 114
      src/uart/uart_commands.c
  10. 13
      src/uart/uart_commands.h
  11. 7
      src/util.c

5
config.in
View File

@ -62,6 +62,11 @@ source src/can/config.in
###############################################################################
### UART Menu #################################################################
source src/uart/config.in
###############################################################################
### Borg Menu #################################################################
dep_bool "Menu Support" MENU_SUPPORT $JOYSTICK_SUPPORT
depends on JOYSTICK_SUPPORT

162
profiles/CTDO-Borg
View File

@ -0,0 +1,162 @@
#
# Automatically generated by make menuconfig: don't edit
#
#
# General Setup
#
MCU=atmega644
FREQ=16000000
#
# Borg Hardware
#
NUM_ROWS=16
NUM_COLS=16
NUMPLANE=3
BORG_HW=HW_BORG_16
#
# Borg16 port setup
#
UART_SUPPORT=y
UART_BAUDRATE_SETTING=19200
COLPORT1=PORTC
COLPORT2=PORTA
ROWPORT=PORTD
PIN_MCLR=4
PIN_CLK=6
PIN_DATA=7
# REVERSE_COLS is not set
# INVERT_ROWS is not set
# INTERLACED_ROWS is not set
# INTERLACED_COLS is not set
#
# Features
#
RANDOM_SUPPORT=y
# LAP_TIME_EXTENSION is not set
SCROLLTEXT_SUPPORT=y
SCROLLTEXT_FONT=FONT_ARIAL8
SCROLLTEXT_BUFFER_SIZE=128
SCROLL_X_SPEED=20
SCROLL_Y_SPEED=20
SCROLLTEXT_TEXT="</#www.das-labor.org"
# RFM12_SUPPORT is not set
#
# Joystick Support
#
JOYSTICK_SUPPORT=y
JOYSTICK_CHOICE=JOY_PARALLEL
#
# Joystick Settings
#
PARALLEL_JOYSTICK_SUPPORT=y
JOYSTICK_PIN_UP=PINB
JOYSTICK_BIT_UP=0
JOYSTICK_PIN_DOWN=PINB
JOYSTICK_BIT_DOWN=1
JOYSTICK_PIN_LEFT=PINB
JOYSTICK_BIT_LEFT=2
JOYSTICK_PIN_RIGHT=PINB
JOYSTICK_BIT_RIGHT=3
JOYSTICK_PIN_FIRE=PIND
JOYSTICK_BIT_FIRE=3
CAN_SUPPORT=y
# SPI_HARDWARE is not set
SPI_PORTIDX=1
SPI_PIN_MOSI=5
SPI_PIN_MISO=6
SPI_PIN_SCK=7
SPI_PIN_SS=4
# CAN_INTERRUPT is not set
SPI_REG_PIN_MCP_INT=PIND
SPI_PIN_MCP_INT=2
MENU_SUPPORT=y
#
# Games
#
GAME_TETRIS_CORE=y
GAME_TETRIS=y
GAME_BASTET=y
GAME_TETRIS_FP=y
GAME_SPACE_INVADERS=y
GAME_SNAKE=y
GAME_BREAKOUT=y
GAME_KART=y
#
# Animations
#
ANIMATION_SCROLLTEXT=y
ANIMATION_SPIRAL=y
SPIRAL_DELAY=5
ANIMATION_JOERN1=y
ANIMATION_SNAKE=y
SNAKE_GAME_DELAY=200
SNAKE_ANIM_DELAY=100
SNAKE_TERMINATION_DELAY=60
SNAKE_MAX_LENGTH=64
SNAKE_MAX_APPLES=10
ANIMATION_CHECKERBOARD=y
ANIMATION_FIRE=y
FIRE_S=30
FIRE_N=5
FIRE_DIV=44
FIRE_DELAY=50
FIRE_CYCLES=800
ANIMATION_MATRIX=y
MATRIX_STREAMER_NUM=30
MATRIX_CYCLES=500
MATRIX_DELAY=60
ANIMATION_RANDOM_BRIGHT=y
ANIMATION_STONEFLY=y
ANIMATION_FLYINGDOTS=y
ANIMATION_GAMEOFLIFE=y
GOL_DELAY=100
GOL_CYCLES=360
ANIMATION_BREAKOUT=y
# ANIMATION_MHERWEG is not set
ANIMATION_MOIRE=y
ANIMATION_LTN_ANT=y
# ANIMATION_TIME is not set
TIME_MASTER_ADDR=0x00
TIME_UPDATE_TIMEOUT=23
ANIMATION_BMSCROLLER=y
ANIMATION_LABORLOGO=y
# ANIMATION_AMPHIBIAN is not set
# ANIMATION_LOGO_OOS is not set
ANIMATION_FAIRYDUST=y
#
# Fixed-point math patterns
#
ANIMATION_PLASMA=y
FP_PLASMA_DELAY=1
ANIMATION_PSYCHEDELIC=y
FP_PSYCHO_DELAY=15
ANIMATION_BLACKHOLE=y
ANIMATION_DNA=y
ANIMATION_SQUARES=y
ANIMATION_TESTS=y
ANIMATION_OFF=y
#
# small Animations
#
# SMALLANIMATION_ROWWALK is not set
SMALLANIMATION_ROWWALK_SPEED=50
SMALLANIMATION_ROWWALK_COUNT=10
# SMALLANIMATION_COLWALK is not set
SMALLANIMATION_COLWALK_SPEED=50
SMALLANIMATION_COLWALK_COUNT=10
# SMALLANIMATION_ROWBOUNCE is not set
SMALLANIMATION_ROWBOUNCE_SPEED=50
SMALLANIMATION_ROWBOUNCE_COUNT=10
# SMALLANIMATION_COLBOUNCE is not set
SMALLANIMATION_COLBOUNCE_SPEED=50
SMALLANIMATION_COLBOUNCE_COUNT=10

13
src/borg_hw/config_borg16.in
View File

@ -17,6 +17,19 @@ comment "Borg16 port setup"
#//das dier sind die individuellen Dateneingänge für die Schieberegister
#define PIN_SHFT1 PD7
bool "UART Support" UART_SUPPORT n
choice 'Baud Rate' \
"2400 2400 \
4800 4800 \
9600 9600 \
14400 14400 \
19200 19200 \
28800 28800 \
38400 38400 \
57600 57600 \
76800 76800 \
115200 115200" \
'19200' UART_BAUDRATE_SETTING
choice 'Column Port 1 (right)' \
"PORTA PORTA \

13
src/main.c
View File

@ -1,6 +1,7 @@
#include <setjmp.h>
#include <avr/interrupt.h>
#include <avr/pgmspace.h>
#include <stdio.h>
#include "config.h"
@ -19,6 +20,10 @@
#include "can/borg_can.h"
#endif
#ifdef UART_SUPPORT
# include "uart/uart.h"
#endif
#ifdef RFM12_SUPPORT
#include "rfm12/borg_rfm12.h"
#endif
@ -41,12 +46,12 @@ int main (void){
bcan_init();
#endif
#ifdef JOYSTICK_SUPPORT
joy_init();
#ifdef UART_SUPPORT
uart_init(UART_BAUD_SELECT(UART_BAUDRATE_SETTING, F_CPU));
#endif
#ifdef UART_SUPPORT
uart_init();
#ifdef JOYSTICK_SUPPORT
joy_init();
#endif
sei();

16
src/uart/Makefile
View File

@ -0,0 +1,16 @@
MAKETOPDIR = ../..
TARGET = libuart.a
SRC_SIM :=
include $(MAKETOPDIR)/defaults.mk
ifeq ($(UART_SUPPORT),y)
SRC = uart.c
SRC += uart_commands.c
endif
include $(MAKETOPDIR)/rules.mk
include $(MAKETOPDIR)/depend.mk

1
src/uart/config.in
View File

@ -0,0 +1 @@
# nothing for now

765
src/uart/uart.c
View File

@ -1,188 +1,689 @@
/* USART-Init beim ATmegaXX */
/*************************************************************************
Title: Interrupt UART library with receive/transmit circular buffers
Author: Peter Fleury <pfleury@gmx.ch> http://jump.to/fleury
File: $Id: uart.c,v 1.12 2014/01/08 21:58:12 peter Exp $
Software: AVR-GCC 4.1, AVR Libc 1.4.6 or higher
Hardware: any AVR with built-in UART,
License: GNU General Public License
DESCRIPTION:
An interrupt is generated when the UART has finished transmitting or
receiving a byte. The interrupt handling routines use circular buffers
for buffering received and transmitted data.
The UART_RX_BUFFER_SIZE and UART_TX_BUFFER_SIZE variables define
the buffer size in bytes. Note that these variables must be a
power of 2.
USAGE:
Refere to the header file uart.h for a description of the routines.
See also example test_uart.c.
NOTES:
Based on Atmel Application Note AVR306
LICENSE:
Copyright (C) 2006 Peter Fleury
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
*************************************************************************/
#include <avr/io.h>
#include <avr/interrupt.h>
#include <stdlib.h>
#include "config.h"
#include <avr/pgmspace.h>
#include "uart.h"
#ifdef ATMEGA128
#define UCSRB UCSR0B
#define UCSRC UCSR0C
#define UDR UDR0
#define UBRRH UBRR0H
#define UBRRL UBRR0L
#define URSEL UMSEL
/*
* constants and macros
*/
/* size of RX/TX buffers */
#define UART_RX_BUFFER_MASK ( UART_RX_BUFFER_SIZE - 1)
#define UART_TX_BUFFER_MASK ( UART_TX_BUFFER_SIZE - 1)
#if ( UART_RX_BUFFER_SIZE & UART_RX_BUFFER_MASK )
#error RX buffer size is not a power of 2
#endif
#if ( UART_TX_BUFFER_SIZE & UART_TX_BUFFER_MASK )
#error TX buffer size is not a power of 2
#endif
#if defined(__AVR_AT90S2313__) \
|| defined(__AVR_AT90S4414__) || defined(__AVR_AT90S4434__) \
|| defined(__AVR_AT90S8515__) || defined(__AVR_AT90S8535__) \
|| defined(__AVR_ATmega103__)
/* old AVR classic or ATmega103 with one UART */
#define AT90_UART
#define UART0_RECEIVE_INTERRUPT UART_RX_vect
#define UART0_TRANSMIT_INTERRUPT UART_UDRE_vect
#define UART0_STATUS USR
#define UART0_CONTROL UCR
#define UART0_DATA UDR
#define UART0_UDRIE UDRIE
#elif defined(__AVR_AT90S2333__) || defined(__AVR_AT90S4433__)
/* old AVR classic with one UART */
#define AT90_UART
#define UART0_RECEIVE_INTERRUPT UART_RX_vect
#define UART0_TRANSMIT_INTERRUPT UART_UDRE_vect
#define UART0_STATUS UCSRA
#define UART0_CONTROL UCSRB
#define UART0_DATA UDR
#define UART0_UDRIE UDRIE
#elif defined(__AVR_ATmega8__) || defined(__AVR_ATmega16__) || defined(__AVR_ATmega32__) \
|| defined(__AVR_ATmega323__)
/* ATmega with one USART */
#define ATMEGA_USART
#define UART0_RECEIVE_INTERRUPT USART_RXC_vect
#define UART0_TRANSMIT_INTERRUPT USART_UDRE_vect
#define UART0_STATUS UCSRA
#define UART0_CONTROL UCSRB
#define UART0_DATA UDR
#define UART0_UDRIE UDRIE
#elif defined (__AVR_ATmega8515__) || defined(__AVR_ATmega8535__)
#define ATMEGA_USART
#define UART0_RECEIVE_INTERRUPT USART_RX_vect
#define UART0_TRANSMIT_INTERRUPT USART_UDRE_vect
#define UART0_STATUS UCSRA
#define UART0_CONTROL UCSRB
#define UART0_DATA UDR
#define UART0_UDRIE UDRIE
#elif defined(__AVR_ATmega163__)
/* ATmega163 with one UART */
#define ATMEGA_UART
#define UART0_RECEIVE_INTERRUPT UART_RX_vect
#define UART0_TRANSMIT_INTERRUPT UART_UDRE_vect
#define UART0_STATUS UCSRA
#define UART0_CONTROL UCSRB
#define UART0_DATA UDR
#define UART0_UDRIE UDRIE
#elif defined(__AVR_ATmega162__)
/* ATmega with two USART */
#define ATMEGA_USART0
#define ATMEGA_USART1
#define UART0_RECEIVE_INTERRUPT USART0_RXC_vect
#define UART1_RECEIVE_INTERRUPT USART1_RXC_vect
#define UART0_TRANSMIT_INTERRUPT USART0_UDRE_vect
#define UART1_TRANSMIT_INTERRUPT USART1_UDRE_vect
#define UART0_STATUS UCSR0A
#define UART0_CONTROL UCSR0B
#define UART0_DATA UDR0
#define UART0_UDRIE UDRIE0
#define UART1_STATUS UCSR1A
#define UART1_CONTROL UCSR1B
#define UART1_DATA UDR1
#define UART1_UDRIE UDRIE1
#elif defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__)
/* ATmega with two USART */
#define ATMEGA_USART0
#define ATMEGA_USART1
#define UART0_RECEIVE_INTERRUPT USART0_RX_vect
#define UART1_RECEIVE_INTERRUPT USART1_RX_vect
#define UART0_TRANSMIT_INTERRUPT USART0_UDRE_vect
#define UART1_TRANSMIT_INTERRUPT USART1_UDRE_vect
#define UART0_STATUS UCSR0A
#define UART0_CONTROL UCSR0B
#define UART0_DATA UDR0
#define UART0_UDRIE UDRIE0
#define UART1_STATUS UCSR1A
#define UART1_CONTROL UCSR1B
#define UART1_DATA UDR1
#define UART1_UDRIE UDRIE1
#elif defined(__AVR_ATmega161__)
/* ATmega with UART */
#error "AVR ATmega161 currently not supported by this libaray !"
#elif defined(__AVR_ATmega169__)
/* ATmega with one USART */
#define ATMEGA_USART
#define UART0_RECEIVE_INTERRUPT USART0_RX_vect
#define UART0_TRANSMIT_INTERRUPT USART0_UDRE_vect
#define UART0_STATUS UCSRA
#define UART0_CONTROL UCSRB
#define UART0_DATA UDR
#define UART0_UDRIE UDRIE
#elif defined(__AVR_ATmega48__) || defined(__AVR_ATmega88__) || defined(__AVR_ATmega168__) || defined(__AVR_ATmega48P__) || defined(__AVR_ATmega88P__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__) \
|| defined(__AVR_ATmega3250__) || defined(__AVR_ATmega3290__) ||defined(__AVR_ATmega6450__) || defined(__AVR_ATmega6490__)
/* ATmega with one USART */
#define ATMEGA_USART0
#define UART0_RECEIVE_INTERRUPT USART_RX_vect
#define UART0_TRANSMIT_INTERRUPT USART_UDRE_vect
#define UART0_STATUS UCSR0A
#define UART0_CONTROL UCSR0B
#define UART0_DATA UDR0
#define UART0_UDRIE UDRIE0
#elif defined(__AVR_ATtiny2313__)
#define ATMEGA_USART
#define UART0_RECEIVE_INTERRUPT USART_RX_vect
#define UART0_TRANSMIT_INTERRUPT USART_UDRE_vect
#define UART0_STATUS UCSRA
#define UART0_CONTROL UCSRB
#define UART0_DATA UDR
#define UART0_UDRIE UDRIE
#elif defined(__AVR_ATmega329__) || \
defined(__AVR_ATmega649__) || \
defined(__AVR_ATmega325__) || \
defined(__AVR_ATmega645__)
/* ATmega with one USART */
#define ATMEGA_USART0
#define UART0_RECEIVE_INTERRUPT USART0_RX_vect
#define UART0_TRANSMIT_INTERRUPT USART0_UDRE_vect
#define UART0_STATUS UCSR0A
#define UART0_CONTROL UCSR0B
#define UART0_DATA UDR0
#define UART0_UDRIE UDRIE0
#elif defined(__AVR_ATmega2560__) || defined(__AVR_ATmega2561__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega1281__) || defined(__AVR_ATmega640__)
/* ATmega with two USART */
#define ATMEGA_USART0
#define ATMEGA_USART1
#define UART0_RECEIVE_INTERRUPT USART0_RX_vect
#define UART1_RECEIVE_INTERRUPT USART1_RX_vect
#define UART0_TRANSMIT_INTERRUPT USART0_UDRE_vect
#define UART1_TRANSMIT_INTERRUPT USART1_UDRE_vect
#define UART0_STATUS UCSR0A
#define UART0_CONTROL UCSR0B
#define UART0_DATA UDR0
#define UART0_UDRIE UDRIE0
#define UART1_STATUS UCSR1A
#define UART1_CONTROL UCSR1B
#define UART1_DATA UDR1
#define UART1_UDRIE UDRIE1
#elif defined(__AVR_ATmega644__)
/* ATmega with one USART */
#define ATMEGA_USART0
#define UART0_RECEIVE_INTERRUPT USART0_RX_vect
#define UART0_TRANSMIT_INTERRUPT USART0_UDRE_vect
#define UART0_STATUS UCSR0A
#define UART0_CONTROL UCSR0B
#define UART0_DATA UDR0
#define UART0_UDRIE UDRIE0
#elif defined(__AVR_ATmega164P__) || defined(__AVR_ATmega324P__) || defined(__AVR_ATmega644P__)
/* ATmega with two USART */
#define ATMEGA_USART0
#define ATMEGA_USART1
#define UART0_RECEIVE_INTERRUPT USART0_RX_vect
#define UART1_RECEIVE_INTERRUPT USART1_RX_vect
#define UART0_TRANSMIT_INTERRUPT USART0_UDRE_vect
#define UART1_TRANSMIT_INTERRUPT USART1_UDRE_vect
#define UART0_STATUS UCSR0A
#define UART0_CONTROL UCSR0B
#define UART0_DATA UDR0
#define UART0_UDRIE UDRIE0
#define UART1_STATUS UCSR1A
#define UART1_CONTROL UCSR1B
#define UART1_DATA UDR1
#define UART1_UDRIE UDRIE1
#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1287__)
/* AT90USBxx with one USART */
#define AT90USB_USART
#define UART0_RECEIVE_INTERRUPT USART1_RX_vect
#define UART0_TRANSMIT_INTERRUPT USART1_UDRE_vect
#define UART0_STATUS UCSR1A
#define UART0_CONTROL UCSR1B
#define UART0_DATA UDR1
#define UART0_UDRIE UDRIE1
#elif defined __AVR
#error "no UART definition for MCU available"
#endif
#define UART_BAUD_CALC(UART_BAUD_RATE,F_OSC) ((F_OSC)/((UART_BAUD_RATE)*16L))
/*
* module global variables
*/
static volatile unsigned char UART_TxBuf[UART_TX_BUFFER_SIZE];
static volatile unsigned char UART_RxBuf[UART_RX_BUFFER_SIZE];
static volatile unsigned char UART_TxHead;
static volatile unsigned char UART_TxTail;
static volatile unsigned char UART_RxHead;
static volatile unsigned char UART_RxTail;
static volatile unsigned char UART_LastRxError;
#if defined( ATMEGA_USART1 )
static volatile unsigned char UART1_TxBuf[UART_TX_BUFFER_SIZE];
static volatile unsigned char UART1_RxBuf[UART_RX_BUFFER_SIZE];
static volatile unsigned char UART1_TxHead;
static volatile unsigned char UART1_TxTail;
static volatile unsigned char UART1_RxHead;
static volatile unsigned char UART1_RxTail;
static volatile unsigned char UART1_LastRxError;
#endif
#ifdef UART_INTERRUPT
volatile static char rxbuf[UART_RXBUFSIZE];
volatile static char txbuf[UART_TXBUFSIZE];
volatile static char *volatile rxhead, *volatile rxtail;
volatile static char *volatile txhead, *volatile txtail;
ISR(USART_UDRE_vect) {
#ifdef UART_LEDS
PORTC ^= 0x01;
ISR (UART0_RECEIVE_INTERRUPT)
/*************************************************************************
Function: UART Receive Complete interrupt
Purpose: called when the UART has received a character
**************************************************************************/
{
unsigned char tmphead;
unsigned char data;
unsigned char usr;
unsigned char lastRxError;
/* read UART status register and UART data register */
usr = UART0_STATUS;
data = UART0_DATA;
/* */
#if defined( AT90_UART )
lastRxError = (usr & (_BV(FE)|_BV(DOR)) );
#elif defined( ATMEGA_USART )
lastRxError = (usr & (_BV(FE)|_BV(DOR)) );
#elif defined( ATMEGA_USART0 )
lastRxError = (usr & (_BV(FE0)|_BV(DOR0)) );
#elif defined ( ATMEGA_UART )
lastRxError = (usr & (_BV(FE)|_BV(DOR)) );
#elif defined( AT90USB_USART )
lastRxError = (usr & (_BV(FE1)|_BV(DOR1)) );
#endif
if ( txhead == txtail ) {
UCSRB &= ~(1 << UDRIE); /* disable data register empty IRQ */
} else {
UDR = *txtail; /* schreibt das Zeichen x auf die Schnittstelle */
if (++txtail == (txbuf + UART_TXBUFSIZE)) txtail = txbuf;
/* calculate buffer index */
tmphead = ( UART_RxHead + 1) & UART_RX_BUFFER_MASK;
if ( tmphead == UART_RxTail ) {
/* error: receive buffer overflow */
lastRxError = UART_BUFFER_OVERFLOW >> 8;
}else{
/* store new index */
UART_RxHead = tmphead;
/* store received data in buffer */
UART_RxBuf[tmphead] = data;
}
UART_LastRxError |= lastRxError;
}
ISR(USART_RXC_vect) {
int diff;
#ifdef UART_LEDS
PORTC ^= 0x02;
ISR (UART0_TRANSMIT_INTERRUPT)
/*************************************************************************
Function: UART Data Register Empty interrupt
Purpose: called when the UART is ready to transmit the next byte
**************************************************************************/
{
unsigned char tmptail;
if ( UART_TxHead != UART_TxTail) {
/* calculate and store new buffer index */
tmptail = (UART_TxTail + 1) & UART_TX_BUFFER_MASK;
UART_TxTail = tmptail;
/* get one byte from buffer and write it to UART */
UART0_DATA = UART_TxBuf[tmptail]; /* start transmission */
}else{
/* tx buffer empty, disable UDRE interrupt */
UART0_CONTROL &= ~_BV(UART0_UDRIE);
}
}
/*************************************************************************
Function: uart_init()
Purpose: initialize UART and set baudrate
Input: baudrate using macro UART_BAUD_SELECT()
Returns: none
**************************************************************************/
void uart_init(unsigned int baudrate)
{
UART_TxHead = 0;
UART_TxTail = 0;
UART_RxHead = 0;
UART_RxTail = 0;
#if defined( AT90_UART )
/* set baud rate */
UBRR = (unsigned char)baudrate;
/* enable UART receiver and transmmitter and receive complete interrupt */
UART0_CONTROL = _BV(RXCIE)|_BV(RXEN)|_BV(TXEN);
#elif defined (ATMEGA_USART)
/* Set baud rate */
if ( baudrate & 0x8000 )
{
UART0_STATUS = (1<<U2X); //Enable 2x speed
baudrate &= ~0x8000;
}
UBRRH = (unsigned char)(baudrate>>8);
UBRRL = (unsigned char) baudrate;
/* Enable USART receiver and transmitter and receive complete interrupt */
UART0_CONTROL = _BV(RXCIE)|(1<<RXEN)|(1<<TXEN);
/* Set frame format: asynchronous, 8data, no parity, 1stop bit */
#ifdef URSEL
UCSRC = (1<<URSEL)|(3<<UCSZ0);
#else
UCSRC = (3<<UCSZ0);
#endif
#elif defined (ATMEGA_USART0 )
/* Set baud rate */
if ( baudrate & 0x8000 )
{
UART0_STATUS = (1<<U2X0); //Enable 2x speed
baudrate &= ~0x8000;
}
UBRR0H = (unsigned char)(baudrate>>8);
UBRR0L = (unsigned char) baudrate;
/* Enable USART receiver and transmitter and receive complete interrupt */
UART0_CONTROL = _BV(RXCIE0)|(1<<RXEN0)|(1<<TXEN0);
/* Set frame format: asynchronous, 8data, no parity, 1stop bit */
#ifdef URSEL0
UCSR0C = (1<<URSEL0)|(3<<UCSZ00);
#else
UCSR0C = (3<<UCSZ00);
#endif
#elif defined ( ATMEGA_UART )
/* set baud rate */
if ( baudrate & 0x8000 )
{
UART0_STATUS = (1<<U2X); //Enable 2x speed
baudrate &= ~0x8000;
}
UBRRHI = (unsigned char)(baudrate>>8);
UBRR = (unsigned char) baudrate;
/* Enable UART receiver and transmitter and receive complete interrupt */
UART0_CONTROL = _BV(RXCIE)|(1<<RXEN)|(1<<TXEN);
#elif defined ( AT90USB_USART )
/* set baud rate */
if ( baudrate & 0x8000 )
{
UART0_STATUS = (1<<U2X1 ); //Enable 2x speed
baudrate &= ~0x8000;
}
UBRR1H = (unsigned char)(baudrate>>8);
UBRR1L = (unsigned char) baudrate;
/* Enable UART receiver and transmitter and receive complete interrupt */
UART0_CONTROL = _BV(RXCIE1)|(1<<RXEN1)|(1<<TXEN1);
/* Set frame format: asynchronous, 8data, no parity, 1stop bit */
UCSR1C = (1<<UCSZ11)|(1<<UCSZ10);
#endif
/* buffer full? */
diff = rxhead - rxtail;
if ( diff < 0 ) diff += UART_RXBUFSIZE;
if (diff < UART_RXBUFSIZE -1) {
// buffer NOT full
*rxhead = UDR;
if (++rxhead == (rxbuf + UART_RXBUFSIZE)) rxhead = rxbuf;
} else {
UDR; //reads the buffer to clear the interrupt condition
}/* uart_init */
/*************************************************************************
Function: uart_getc()
Purpose: return byte from ringbuffer
Returns: lower byte: received byte from ringbuffer
higher byte: last receive error
**************************************************************************/
unsigned int uart_getc(void)
{
unsigned char tmptail;
unsigned char data;
if ( UART_RxHead == UART_RxTail ) {
return UART_NO_DATA; /* no data available */
}
}
#endif // UART_INTERRUPT
/* calculate /store buffer index */
tmptail = (UART_RxTail + 1) & UART_RX_BUFFER_MASK;
UART_RxTail = tmptail;
/* get data from receive buffer */
data = UART_RxBuf[tmptail];
void uart_init() {
PORTD |= 0x01; //Pullup an RXD an
data = (UART_LastRxError << 8) + data;
UART_LastRxError = 0;
return data;
UCSRA = 0;
UCSRB |= (1<<TXEN); //UART TX einschalten
UCSRC |= (1<<URSEL)|(3<<UCSZ0); //Asynchron 8N1
}/* uart_getc */
UCSRB |= ( 1 << RXEN ); //Uart RX einschalten
// UBRRH=(uint8_t)(UART_BAUD_CALC(UART_BAUD_RATE,F_CPU)>>8);
// UBRRL=(uint8_t)(UART_BAUD_CALC(UART_BAUD_RATE,F_CPU));
/*************************************************************************
Function: uart_putc()
Purpose: write byte to ringbuffer for transmitting via UART
Input: byte to be transmitted
Returns: none
**************************************************************************/
void uart_putc(unsigned char data)
{
unsigned char tmphead;
UBRRL = 8;
#ifdef UART_INTERRUPT
// init buffers
rxhead = rxtail = rxbuf;
txhead = txtail = txbuf;
tmphead = (UART_TxHead + 1) & UART_TX_BUFFER_MASK;
// activate rx IRQ
UCSRB |= (1 << RXCIE);
#endif // UART_INTERRUPT
}
while ( tmphead == UART_TxTail ){
;/* wait for free space in buffer */
}
#ifdef UART_INTERRUPT
void uart_putc(char c) {
volatile int diff;
UART_TxBuf[tmphead] = data;
UART_TxHead = tmphead;
/* buffer full? */
do {
diff = txhead - txtail;
if ( diff < 0 ) diff += UART_TXBUFSIZE;
} while ( diff >= UART_TXBUFSIZE -1 );
/* enable UDRE interrupt */
UART0_CONTROL |= _BV(UART0_UDRIE);
cli();
*txhead = c;
if (++txhead == (txbuf + UART_TXBUFSIZE)) txhead = txbuf;
}/* uart_putc */
UCSRB |= (1 << UDRIE); /* enable data register empty IRQ */
sei();
}
#else // WITHOUT INTERRUPT
void uart_putc(char c) {
while (!(UCSRA & (1<<UDRE))); /* warten bis Senden moeglich */
UDR = c; /* schreibt das Zeichen x auf die Schnittstelle */
}
#endif // UART_INTERRUPT
/*************************************************************************
Function: uart_puts()
Purpose: transmit string to UART
Input: string to be transmitted
Returns: none
**************************************************************************/
void uart_puts(const char *s )
{
while (*s)
uart_putc(*s++);
}/* uart_puts */
void uart_putstr(char *str) {
while(*str) {
uart_putc(*str++);
/*************************************************************************
Function: uart_puts_p()
Purpose: transmit string from program memory to UART
Input: program memory string to be transmitted
Returns: none
**************************************************************************/
void uart_puts_p(const char *progmem_s )
{
register char c;
while ( (c = pgm_read_byte(progmem_s++)) )
uart_putc(c);
}/* uart_puts_p */
/*
* these functions are only for ATmegas with two USART
*/
#if defined( ATMEGA_USART1 )
ISR(UART1_RECEIVE_INTERRUPT)
/*************************************************************************
Function: UART1 Receive Complete interrupt
Purpose: called when the UART1 has received a character
**************************************************************************/
{
unsigned char tmphead;
unsigned char data;
unsigned char usr;
unsigned char lastRxError;
/* read UART status register and UART data register */
usr = UART1_STATUS;
data = UART1_DATA;
/* */
lastRxError = (usr & (_BV(FE1)|_BV(DOR1)) );
/* calculate buffer index */
tmphead = ( UART1_RxHead + 1) & UART_RX_BUFFER_MASK;
if ( tmphead == UART1_RxTail ) {
/* error: receive buffer overflow */
lastRxError = UART_BUFFER_OVERFLOW >> 8;
}else{
/* store new index */
UART1_RxHead = tmphead;
/* store received data in buffer */
UART1_RxBuf[tmphead] = data;
}
UART1_LastRxError |= lastRxError;
}
void uart_putstr_P(PGM_P str) {
char tmp;
while((tmp = pgm_read_byte(str))) {
uart_putc(tmp);
str++;
ISR(UART1_TRANSMIT_INTERRUPT)
/*************************************************************************
Function: UART1 Data Register Empty interrupt
Purpose: called when the UART1 is ready to transmit the next byte
**************************************************************************/
{
unsigned char tmptail;
if ( UART1_TxHead != UART1_TxTail) {
/* calculate and store new buffer index */
tmptail = (UART1_TxTail + 1) & UART_TX_BUFFER_MASK;
UART1_TxTail = tmptail;
/* get one byte from buffer and write it to UART */
UART1_DATA = UART1_TxBuf[tmptail]; /* start transmission */
}else{
/* tx buffer empty, disable UDRE interrupt */
UART1_CONTROL &= ~_BV(UART1_UDRIE);
}
}
void uart_hexdump(char *buf, int len)
/*************************************************************************
Function: uart1_init()
Purpose: initialize UART1 and set baudrate
Input: baudrate using macro UART_BAUD_SELECT()
Returns: none
**************************************************************************/
void uart1_init(unsigned int baudrate)
{
unsigned char x=0;
char sbuf[3];
while(len--){
itoa(*buf++, sbuf, 16);
if (sbuf[1] == 0) uart_putc(' ');
uart_putstr(sbuf);
uart_putc(' ');
if(++x == 16) {
uart_putstr_P(PSTR("\r\n"));
x = 0;
UART1_TxHead = 0;
UART1_TxTail = 0;
UART1_RxHead = 0;
UART1_RxTail = 0;
/* Set baud rate */
if ( baudrate & 0x8000 )
{
UART1_STATUS = (1<<U2X1); //Enable 2x speed
baudrate &= ~0x8000;
}
UBRR1H = (unsigned char)(baudrate>>8);
UBRR1L = (unsigned char) baudrate;
/* Enable USART receiver and transmitter and receive complete interrupt */
UART1_CONTROL = _BV(RXCIE1)|(1<<RXEN1)|(1<<TXEN1);
/* Set frame format: asynchronous, 8data, no parity, 1stop bit */
#ifdef URSEL1
UCSR1C = (1<<URSEL1)|(3<<UCSZ10);
#else
UCSR1C = (3<<UCSZ10);
#endif
}/* uart_init */
/*************************************************************************
Function: uart1_getc()
Purpose: return byte from ringbuffer
Returns: lower byte: received byte from ringbuffer
higher byte: last receive error
**************************************************************************/
unsigned int uart1_getc(void)
{
unsigned char tmptail;
unsigned char data;
if ( UART1_RxHead == UART1_RxTail ) {
return UART_NO_DATA; /* no data available */
}
}
/* calculate /store buffer index */
tmptail = (UART1_RxTail + 1) & UART_RX_BUFFER_MASK;
UART1_RxTail = tmptail;
#ifdef UART_INTERRUPT
char uart_getc()
{
char val;
/* get data from receive buffer */
data = UART1_RxBuf[tmptail];
while(rxhead==rxtail) ;
data = (UART1_LastRxError << 8) + data;
UART1_LastRxError = 0;
return data;
val = *rxtail;
if (++rxtail == (rxbuf + UART_RXBUFSIZE)) rxtail = rxbuf;
}/* uart1_getc */
return val;
}
#else // WITHOUT INTERRUPT
char uart_getc()
/*************************************************************************
Function: uart1_putc()
Purpose: write byte to ringbuffer for transmitting via UART
Input: byte to be transmitted
Returns: none
**************************************************************************/
void uart1_putc(unsigned char data)
{
while (!(UCSRA & (1<<RXC))); // warten bis Zeichen verfuegbar
return UDR; // Zeichen aus UDR zurueckgeben
}
#endif // UART_INTERRUPT
unsigned char tmphead;
tmphead = (UART1_TxHead + 1) & UART_TX_BUFFER_MASK;
while ( tmphead == UART1_TxTail ){
;/* wait for free space in buffer */
}
UART1_TxBuf[tmphead] = data;
UART1_TxHead = tmphead;
/* enable UDRE interrupt */
UART1_CONTROL |= _BV(UART1_UDRIE);
}/* uart1_putc */
// returns 1 on success
#ifdef UART_INTERRUPT
char uart_getc_nb(char *c)
/*************************************************************************
Function: uart1_puts()
Purpose: transmit string to UART1
Input: string to be transmitted
Returns: none
**************************************************************************/
void uart1_puts(const char *s )
{
if (rxhead==rxtail) return 0;
while (*s)
uart1_putc(*s++);
*c = *rxtail;
if (++rxtail == (rxbuf + UART_RXBUFSIZE)) rxtail = rxbuf;
}/* uart1_puts */
return 1;
}
#else // WITHOUT INTERRUPT
char uart_getc_nb(char *c)
/*************************************************************************
Function: uart1_puts_p()
Purpose: transmit string from program memory to UART1
Input: program memory string to be transmitted
Returns: none
**************************************************************************/
void uart1_puts_p(const char *progmem_s )
{
if (UCSRA & (1<<RXC)) { // Zeichen verfuegbar
*c = UDR;
return 1;
}
register char c;
return 0;
}
#endif // UART_INTERRUPT
while ( (c = pgm_read_byte(progmem_s++)) )
uart1_putc(c);
}/* uart1_puts_p */
#endif

226
src/uart/uart.h
View File

@ -1,35 +1,219 @@
#ifndef UART_H
#define UART_H
/************************************************************************
Title: Interrupt UART library with receive/transmit circular buffers
Author: Peter Fleury <pfleury@gmx.ch> http://jump.to/fleury
File: $Id: uart.h,v 1.12 2012/11/19 19:52:27 peter Exp $
Software: AVR-GCC 4.1, AVR Libc 1.4
Hardware: any AVR with built-in UART, tested on AT90S8515 & ATmega8 at 4 Mhz
License: GNU General Public License
Usage: see Doxygen manual
LICENSE:
Copyright (C) 2006 Peter Fleury
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
************************************************************************/
/**
* UART Library
* @defgroup pfleury_uart UART Library
* @code #include <uart.h> @endcode
*
* #define F_CPU 16000000 // Oszillator-Frequenz in Hz
* #define UART_INTERRUPT 1
* #define UART_BAUD_RATE 19200
* #define UART_RXBUFSIZE 16
* #define UART_TXBUFSIZE 16
* #define UART_LINE_BUFFER_SIZE 40
* #define UART_LEDS // LED1 and LED2 toggle on tx and rx interrupt
* @brief Interrupt UART library using the built-in UART with transmit and
* receive circular buffers.
*
* This library can be used to transmit and receive data through the built in
* UART.
*
* An interrupt is generated when the UART has finished transmitting or
* receiving a byte. The interrupt handling routines use circular buffers
* for buffering received and transmitted data.
*
* The UART_RX_BUFFER_SIZE and UART_TX_BUFFER_SIZE constants define the size of
* the circular buffers in bytes. Note that these constants must be a power of
* 2. You may need to adapt this constants to your target and your application
* by adding CDEFS += -DUART_RX_BUFFER_SIZE=nn -DUART_RX_BUFFER_SIZE=nn to your
* Makefile.
*
* @note Based on Atmel Application Note AVR306
* @author Peter Fleury pfleury@gmx.ch http://jump.to/fleury
*/
/**@{*/
#if (__GNUC__ * 100 + __GNUC_MINOR__) < 304
#error "This library requires AVR-GCC 3.4 or later, update to newer AVR-GCC compiler !"
#endif
/*
* constants and macros
*/
#include <inttypes.h>
#include <avr/pgmspace.h>
/** @brief UART Baudrate Expression
* @param xtalcpu system clock in Mhz, e.g. 4000000UL for 4Mhz
* @param baudrate baudrate in bps, e.g. 1200, 2400, 9600
*/
#define UART_BAUD_SELECT(baudRate,xtalCpu) \
(((xtalCpu) + 8UL * (baudRate)) / (16UL * (baudRate)) -1UL)
void uart_init();
/** @brief UART Baudrate Expression for ATmega double speed mode
* @param xtalcpu system clock in Mhz, e.g. 4000000UL for 4Mhz
* @param baudrate baudrate in bps, e.g. 1200, 2400, 9600
*/
#define UART_BAUD_SELECT_DOUBLE_SPEED(baudRate,xtalCpu) \
(((((xtalCpu) + 4UL * (baudRate)) / (8UL * (baudRate)) -1UL)) | 0x8000)
void uart_putc(char c);
void uart_putstr(char * str);
void uart_putstr_P(PGM_P str);
void uart_hexdump(char *buf, int len);
char uart_getc();
char uart_getc_nb(char *c); // returns 1 on success
/** Size of the circular receive buffer, must be power of 2 */
#ifndef UART_RX_BUFFER_SIZE
#define UART_RX_BUFFER_SIZE 32
#endif
//get one Cariage return terminated line
//echo charakters back on Uart
//returns buffer with zero terminated line on success, 0 pointer otherwise
char * uart_getline_nb();
/** Size of the circular transmit buffer, must be power of 2 */
#ifndef UART_TX_BUFFER_SIZE
#define UART_TX_BUFFER_SIZE 32
#endif
/* test if the size of the circular buffers fits into SRAM */
#if ( (UART_RX_BUFFER_SIZE+UART_TX_BUFFER_SIZE) >= (RAMEND-0x60 ) ) && defined __AVR
#error "size of UART_RX_BUFFER_SIZE + UART_TX_BUFFER_SIZE larger than size of SRAM"
#endif
/*
** high byte error return code of uart_getc()
*/
#define UART_FRAME_ERROR 0x1000 /* Framing Error by UART */
#define UART_OVERRUN_ERROR 0x0800 /* Overrun condition by UART */
#define UART_PARITY_ERROR 0x0400 /* Parity Error by UART */
#define UART_BUFFER_OVERFLOW 0x0200 /* receive ringbuffer overflow */
#define UART_NO_DATA 0x0100 /* no receive data available */
/*
** function prototypes
*/
/**
@brief Initialize UART and set baudrate
@param baudrate Specify baudrate using macro UART_BAUD_SELECT()
@return none
*/
extern void uart_init(unsigned int baudrate);
/**
* @brief Get received byte from ringbuffer
*
* Returns in the lower byte the received character and in the
* higher byte the last receive error.
* UART_NO_DATA is returned when no data is available.
*
* @param void
* @return lower byte: received byte from ringbuffer
* @return higher byte: last receive status
* - \b 0 successfully received data from UART
* - \b UART_NO_DATA
* <br>no receive data available
* - \b UART_BUFFER_OVERFLOW
* <br>Receive ringbuffer overflow.
* We are not reading the receive buffer fast enough,
* one or more received character have been dropped
* - \b UART_OVERRUN_ERROR
* <br>Overrun condition by UART.
* A character already present in the UART UDR register was not read
* by the interrupt handler before the next character arrived,
* one or more received characters have been dropped.
* - \b UART_FRAME_ERROR
* <br>Framing Error by UART
*/
extern unsigned int uart_getc(void);
/**
* @brief Put byte to ringbuffer for transmitting via UART
* @param data byte to be transmitted
* @return none
*/
extern void uart_putc(unsigned char data);
/**
* @brief Put string to ringbuffer for transmitting via UART
*
* The string is buffered by the uart library in a circular buffer
* and one character at a time is transmitted to the UART using interrupts.
* Blocks if it can not write the whole string into the circular buffer.
*
* @param s string to be transmitted
* @return none
*/
extern void uart_puts(const char *s );
/**
* @brief Put string from program memory to ringbuffer for transmitting via
* UART.
*
* The string is buffered by the uart library in a circular buffer
* and one character at a time is transmitted to the UART using interrupts.
* Blocks if it can not write the whole string into the circular buffer.
*
* @param s program memory string to be transmitted
* @return none
* @see uart_puts_P
*/
extern void uart_puts_p(const char *s );
/**
* @brief Macro to automatically put a string constant into program memory
*/
#define uart_puts_P(__s) uart_puts_p(PSTR(__s))
/** @brief Initialize USART1 (only available on selected ATmegas)
* @see uart_init
*/
extern void uart1_init(unsigned int baudrate);
/** @brief Get received byte of USART1 from ringbuffer (only available on
* selected ATmega)
* @see uart_getc
*/
extern unsigned int uart1_getc(void);
/** @brief Put byte to ringbuffer for transmitting via USART1 (only available
* on selected ATmega)
* @see uart_putc
*/
extern void uart1_putc(unsigned char data);
/** @brief Put string to ringbuffer for transmitting via USART1 (only available
* on selected ATmega)
* @see uart_puts
*/
extern void uart1_puts(const char *s );
/** @brief Put string from program memory to ringbuffer for transmitting via
* USART1 (only available on selected ATmega)
* @see uart_puts_p
*/
extern void uart1_puts_p(const char *s );
/** @brief Macro to automatically put a string constant into program memory */
#define uart1_puts_P(__s) uart1_puts_p(PSTR(__s))
/**@}*/
#endif // UART_H

114
src/uart/uart_commands.c
View File

@ -0,0 +1,114 @@
#include <stdint.h>
#include <string.h>
#include <ctype.h>
#include <stdbool.h>
#include <setjmp.h>
#include <avr/pgmspace.h>
#include "../config.h"
#include "../borg_hw/borg_hw.h"
#include "../scrolltext/scrolltext.h"
#include "uart.h"
#include "uart_commands.h"
#define UART_SCROLL_BUFFER_SIZE (SCROLLTEXT_BUFFER_SIZE + 8)
char g_rx_buffer[UART_SCROLL_BUFFER_SIZE];
uint8_t g_rx_index;
extern jmp_buf newmode_jmpbuf;
volatile unsigned char mode;
void uartcmd_clear_buffer(void) {
char *p = &g_rx_buffer[0];
for (uint8_t i = UART_SCROLL_BUFFER_SIZE; i--;) {
*p++ = 0;
}
g_rx_index = 0;
}
char const UART_STR_PROMPT[] PROGMEM = "\r\n> ";
char const UART_STR_ERROR[] PROGMEM = "\r\ntransmission error";
char const UART_STR_UNKNOWN[] PROGMEM = "\r\nunknown command";
char const UART_STR_TOOLONG[] PROGMEM = "\r\ncommand to long";
char const UART_STR_HELP[] PROGMEM = "\r\nhelp msg next prev reset scroll";
char const UART_CMD_HELP[] PROGMEM = "help";
char const UART_CMD_MSG[] PROGMEM = "msg ";
char const UART_CMD_NEXT[] PROGMEM = "next";
char const UART_CMD_PREV[] PROGMEM = "prev";
char const UART_CMD_RESET[] PROGMEM = "reset";
char const UART_CMD_SCROLL[] PROGMEM = "scroll ";
bool uartcmd_read_until_enter(void) {
while (g_rx_index < (UART_SCROLL_BUFFER_SIZE - 1)) {
int uart_result = uart_getc();
switch (uart_result & 0xFF00u) {
case 0:
if (!(uart_result == '\r' || uart_result == '\n')) {
g_rx_buffer[g_rx_index++] = uart_result;
uart_putc(uart_result);
} else {
g_rx_buffer[g_rx_index++] = 0;
return true;
}
break;
case UART_FRAME_ERROR:
case UART_OVERRUN_ERROR:
case UART_PARITY_ERROR:
case UART_BUFFER_OVERFLOW:
uartcmd_clear_buffer();
uart_puts_p(UART_STR_ERROR);
uart_puts_p(UART_STR_PROMPT);
break;
case UART_NO_DATA:
default:
return false;
break;
}
}
if (g_rx_index >= (UART_SCROLL_BUFFER_SIZE - 1)) {
uartcmd_clear_buffer();
uart_puts_p(UART_STR_TOOLONG);
uart_puts_p(UART_STR_PROMPT);
}
return false;
}
void uartcmd_process(void) {
if (uartcmd_read_until_enter()) {
if (!strncmp_P(g_rx_buffer, UART_CMD_HELP, 4)) {
uart_puts_p(UART_STR_HELP);
} else if (!strncmp_P(g_rx_buffer, UART_CMD_MSG, 4)) {
g_rx_buffer[1] = '<';
g_rx_buffer[2] = '/';
g_rx_buffer[3] = '#';
// text must not be longer than the scroll text buffer
g_rx_buffer[1 + SCROLLTEXT_BUFFER_SIZE - 1] = 0;
scrolltext(&g_rx_buffer[1]);
} else if (!strncmp_P(g_rx_buffer, UART_CMD_NEXT, 4)) {
uart_puts_p(UART_STR_PROMPT);
uartcmd_clear_buffer();
longjmp(newmode_jmpbuf, mode);
} else if (!strncmp_P(g_rx_buffer, UART_CMD_PREV, 4)) {
uart_puts_p(UART_STR_PROMPT);
uartcmd_clear_buffer();
if (mode > 1) {
longjmp(newmode_jmpbuf, mode - 2);
}
} else if (!strncmp_P(g_rx_buffer, UART_CMD_RESET,
UART_SCROLL_BUFFER_SIZE)) {
timer0_off();
} else if (!strncmp_P(g_rx_buffer, UART_CMD_SCROLL, 7)) {
// text must not be longer than the scroll text buffer
g_rx_buffer[7 + SCROLLTEXT_BUFFER_SIZE - 1] = 0;
scrolltext(&g_rx_buffer[7]);
} else {
uart_puts_p(UART_STR_UNKNOWN);
}
uart_puts_p(UART_STR_PROMPT);
uartcmd_clear_buffer();
}
}

13
src/uart/uart_commands.h
View File

@ -0,0 +1,13 @@
/*
* uart_commands.h
*
* Created on: 16.08.2014
* Author: chris
*/
#ifndef UART_COMMANDS_H_
#define UART_COMMANDS_H_
void uartcmd_process(void);
#endif /* UART_COMMANDS_H_ */

7
src/util.c
View File

@ -19,6 +19,9 @@ extern jmp_buf newmode_jmpbuf;
# include "can/borg_can.h"
#endif
#ifdef UART_SUPPORT
# include "uart/uart_commands.h"
#endif
void wait(int ms){
/* Always use Timer1 except for the Arduino/LoL Shield platform. */
@ -41,6 +44,10 @@ void wait(int ms){
bcan_process_messages();
#endif
#ifdef UART_SUPPORT
uartcmd_process();
#endif
#ifdef RFM12_SUPPORT
borg_rfm12_tick();
#endif

Write Preview
Loading…
Cancel
Save