Browse Source

include old howto snippets and printed addons

main
Hendrik Langer 5 years ago
parent
commit
ef2c814366
  1. BIN
      ANYCUBIC Kossel User Manual_V2.pdf
  2. BIN
      Anycubic_Linear_Plus_Cura_Profile.zip
  3. 150
      README.md
  4. BIN
      addons/Anycubic_Kossel_Toolholder.zip
  5. BIN
      addons/Delta_Kossel_Tool_Box.zip
  6. BIN
      addons/emergency_stop_-_Not-Stopp_Anycubic.zip
  7. 39
      addons/kossel_plotter_pen_holder.scad

BIN
ANYCUBIC Kossel User Manual_V2.pdf

Binary file not shown.

BIN
Anycubic_Linear_Plus_Cura_Profile.zip

Binary file not shown.

150
README.md

@ -1,2 +1,152 @@
# Anycubic Kossel Plus # Anycubic Kossel Plus
Set-up guide and related things for the Anycubic Kossel Linear Plus 3D Printer.
## Getting started
### Build Marlin
* [Marlin Repository](https://github.com/MarlinFirmware/Marlin)
* [Instructions for Anycubic Kossel](https://github.com/MarlinFirmware/Marlin/tree/bugfix-2.0.x/config/examples/delta/Anycubic/Kossel)
```bash
git clone https://github.com/MarlinFirmware/Marlin.git -b bugfix-2.0.x
cd Marlin
cp config/examples/delta/Anycubic/Kossel/Configuration.h Marlin/
cp config/examples/delta/Anycubic/Kossel/Configuration_adv.h Marlin/
```
Adjust the `Marlin/Configuration.h` for your model:
> #define ANYCUBIC_KOSSEL_PLUS
> #define ANYCUBIC_PROBE_VERSION 2
> #define ANYCUBIC_KOSSEL_ENABLE_BED 1
>
> ( #if ANYCUBIC_PROBE_VERSION == 2
> #define NOZZLE_TO_PROBE_OFFSET { 0, 0, -15.00 }
> )
```bash
virtualenv -p python --no-site-packages .
source bin/activate
pip install -U platformio
pio run
pio run --target upload
```
### Set up the 3d printer
* `Configuration > Advanced Settings > Initialize EEPROM`
* `Configuration > Delta Calibration > Set Delta Height` ( G33 P1 )
* `Configuration > Delta Configuration > Probe Z-offset` ( Set manually to 15.00 )
* `Configuration > Delta Calibration > Set Delta Height` ( G33 P1 )
* connect the Z-Probe and start `Configuration > Delta Calibration > Auto Calibration`
* `Configuration > Delta Calibration > Store Settings`
* `Motion > Bed Leveling > Level bed` followed by `Store Settings`
use `Configuration > Advanced Settings > Probe Z Offset` to correct the difference and execute the calibration again
### optional: tune PID
#### Nozzle
(DEFAULT_Kp 22.36 DEFAULT_Ki 1.63 DEFAULT_Kd 76.48)
* run the following G-Code (e.g. in Proterface) with the nozzle cold: 'M106 S255' & 'M303 E0 C10 S200'
* store measured values: 'M301 P17.96 I1.44 D55.90'
#### Bed
(DEFAULT_bedKp 374.03 DEFAULT_bedKi 72.47 DEFAULT_bedKd 482.59)
* run 'M303 E-1 C8 S60'
* store measured values: 'M304 P254.09 I44.31 D971.39'
#### store values in eeprom:
'M500'
### Configure Cura
[Cura Profiles](https://www.thingiverse.com/thing:2367365)
Download the profiles and put the json-Files into: `$HOME/.local/share/cura/4.4/definitions/`
## Snippets
### Firmware backup
avrdude -p m2560 -c avrispmkII -P /dev/ttyUSB0 -b 115200 -D -U flash:r:factory_kossel.hex:i
avrdude -p m2560 -c avrispmkII -P /dev/ttyUSB0 -b 115200 -D -U eeprom:r:factory_kossel_eeprom.hex:i
### Litophanes:
[3dp.rocks Image to Litophane Converter](http://3dp.rocks/lithophane/)
### Plotting
use Inkscape and the included [Gcodetools](https://github.com/cnc-club/gcodetools).
A 3d-printable pen holder (to use with rubber-bands) is attached in the `addons/` folder.
#### Prepare Image
* Make sure to have everything on a single layer
* At the top bar leave units at px but treat them as mm!
* scale object to desired size
* `Path -> Object to Path`
* `Path -> Combine`
* `Path -> Union`
* `View -> Display mode -> Outline` to preview
* if there are too many nodes: `Path -> Simplify`
#### Gcodetools
* `Extensions -> Gcodetools -> Tools library...` select `default` tool
* Diameter: 1.0
* Feed: 2400
* Penetration feed: 2400
* Passing feed: 3600
* Depth step: 1.0
* `Extensions -> Gcodetools -> Orientation points`
* 2-points mode
* Z surface: 0.0
* Z depth: -1.0
* move to center of object (0,0 is center of print-bed) and a bit to the right, as the pen is mounted right from the effector (45mm)
* select object
* `Extensions -> Gcodetools -> Path to Gcode
* Offset along Z axis: 11.0
* Z safe height for G00 move over blank: 3.0
* Units: mm
#### Print
* home printer
* print
#### Experimental Cura settings:
> Layer Height: 10 mm
> Initial Layer Height: 10 mm
> Wall Line Count: 1
> Top/Bottom Thickness: 10 mm
> Print Thin Walls: True
> Infill Density: 0 %
> Default Printing Temperature: 0 °C
> Build Plate Temperature: 0 °C
> Enable Retraction: True
> Retraction Minimum Travel: 2 mm
> Combing Mode: off
> Z Hop When Retracted: True
> Z Hop Height: 2 mm
> Enable Print Cooling: False
> Generate Support: False
> Build Plate Adhesion Type: none
> Slicing Tolerance: Inclusive
> Maximum Resolution: 0.2 mm
## Original Anycubic Links
* https://github.com/ANYCUBIC-3D/ANYCUBIC_Kossel_Source_Code

BIN
addons/Anycubic_Kossel_Toolholder.zip

Binary file not shown.

BIN
addons/Delta_Kossel_Tool_Box.zip

Binary file not shown.

BIN
addons/emergency_stop_-_Not-Stopp_Anycubic.zip

Binary file not shown.

39
addons/kossel_plotter_pen_holder.scad

@ -0,0 +1,39 @@
pen_diameter=9; // stabilo: 9mm // weitere: 11mm
height=65;
thick=1.5;
$fn=100;
module rubberband_fix() {
translate([1.5,0,0]) cube([pen_diameter/2+2*thick-3,1.5,1]);
translate([0,1.5,0]) cube([pen_diameter/2+2*thick,1.5,1]);
}
module all_rubberband_fix() {
translate([0,pen_diameter+2*thick,47+4+4*thick+2]) rubberband_fix();
translate([0,pen_diameter+2*thick,47+4+4*thick+2-12]) rubberband_fix();
translate([0,pen_diameter+2*thick,47+4+4*thick+2-24]) rubberband_fix();
translate([0,pen_diameter+2*thick,4+thick]) rubberband_fix();
translate([0,pen_diameter+2*thick,4+thick+12]) rubberband_fix();
translate([pen_diameter/2+2*thick,0,47+4+4*thick+2]) rotate([0,0,180]) rubberband_fix();
translate([pen_diameter/2+2*thick,0,47+4+4*thick+2-12]) rotate([0,0,180]) rubberband_fix();
translate([pen_diameter/2+2*thick,0,47+4+4*thick+2-24]) rotate([0,0,180]) rubberband_fix();
translate([pen_diameter/2+2*thick,0,4+thick]) rotate([0,0,180]) rubberband_fix();
translate([pen_diameter/2+2*thick,0,4+thick+12]) rotate([0,0,180]) rubberband_fix();
}
difference() {
union() {
cube([pen_diameter/2+2*thick,pen_diameter+2*thick,height]);
translate([-22,0,4]) cube([22,pen_diameter+2*thick,47+4*thick]);
translate([-3,0,1]) cube([3,pen_diameter+2*thick,1]); // rubber band bottom
translate([-3,0,47+4+4*thick+2]) cube([3,pen_diameter+2*thick,1]); // rubber band top
all_rubberband_fix();
}
translate([pen_diameter/2+thick,pen_diameter/2+thick,-0.2]) cylinder(r=pen_diameter/2,h=height+0.4); // pen
translate([-20-12,0,4+2*thick+7]) cube([20,pen_diameter+2*thick,47+thick-7-1]); // fan
translate([-30,0,4+2*thick]) cube([30,pen_diameter+2*thick,7]); // plate
translate([-20-9,0,4]) cube([20,pen_diameter+2*thick,2*thick]); // bottom
//#translate([-30,0,0.33*height]) cube([30,pen_diameter+2*thick,2]); // rubberband cutout
//#translate([-30,0,0.66*height]) cube([30,pen_diameter+2*thick,2]); // rubberband cutout
}
Loading…
Cancel
Save